User manual

30
3. Press and to select Base settings;
4. Press and to select Call Barring;
5. Use the keypad to key in the PIN (0000), press to confirm;
6. Press and or just to select your preferred number to set call barring
(up to 5 numbers);
7. Use the keypad to key in the number, press to confirm;
To Set LCR (Least Cost Route)
With the LCR function, the phone will automatically replace a long number with a
comparative short number, to simplify the process of dialing a long number. For example,
if the user program to replace "00" with "17909", then when he dials "006567417211",
then the phone will automatically replace the number to be dialed out as
"179096567417211".
1. Press and to select LCR under Base Settings mode;
2. Use the keypad to key the PIN (Default:0000), press to confirm;
3. Use the keypad to key in the SHORT number that you want to replace the long
number, press to confirm;
4. Use the keypad to key in the LONG number, press to confirm.
To Change PIN
1. Press and to select PIN under Base Settings mode;
2. Use the keypad to key in the original PIN (0000), press to confirm;
3. Use the keypad to key in the new PIN you want to set, press to confirm.
Default Settings
1. Press and to select Default under Base Settings mode;
2. Use the keypad to key in the current PIN, press to confirm, then all features
will return to their default settings.

Resetting the System
If you have set a PIN and forgotten it, you need to reset the system. The PIN will be reset
to 0000. If you reset the system, you will lose all stored information and all features will
return to their default settings. You need to register the handset to the base unit again.