User manual

1. Press and to select Select Base under Cordless settings mode, the display

shows BASE 1; BASE 2; BASE 3; BASE 4;

2. Press and to select the certain base.

To De-register a Handset

You may need to do this if you have more than one handset registered to your base unit

and you need to replace a faulty handset.

1. Press and to select De-register under Cordless settings mode;

2. Key in the PIN (default 0000), press to confirm;

3. Then key in the number of the handset you want to de-register, press to

confirm.

Note:

You cannot de-register the handset you are currently using.

To Set LCD time out

You can adjust the LCD time out here.

1. Press and to select Settings under main menu mode;

2. Press and to select Phone settings;

3. Press to select Time out;

4. Press up/down and to change the time interval (1 min, 2 min, 3 min, 4

min).

To Set the Contrast

You can adjust the contrast of your display.

5. Press and to select Settings under main menu mode;

6. Press and to select Phone settings;

7. Press to select Contrast;

8. Press up/down and to change the contrast.