User manual
26
4. Press and to select Time zone;
5. Press and to select your preferred time zone;
To Set Daylight Saving
Choose Daylight saving when you are in a zone with summertime, and choose Standard
in all other zones.
1. Repeat the step 1-3 above;
2. Press and to select Daylight saving;
3. Press and to select your preferred mode (Standard, Daylight saving).
If you wish to adjust the Time format and Time separator as well as the Date format and
Date separator settings, this is easily done here.
Registration
Your SK9500 is supplied with the handset already registered to the base unit; you
shouldn't need to register it. But if you've bought extra handset, you'll need to register
each one to your original base unit. Maximum 4 handsets can be registered to one base.
To Enter Registration Mode
1. Press and to select Settings under menu mode;
2. Press and to select Cordless settings, and the display shows Select base,
Base sub De-register and Base setting.
To Register a Handset
1. Press and hold the Handset locator button on the base unit for a while, until you
hear "beep" sound twice continuously;
2. Press and to select Base Sub under Cordless settings mode, the display
shows BASE 1; BASE 2; BASE 3; BASE 4;
3. Press and to select the certain base;
4. Enter base PIN (0000), and press to confirm;
5. After registered, the handset goes back to the standby mode.
To Select a Base
You may need to do this if your handset has been registered to more than one base, and
you need to select one to use.