User manual

4. Press and to select Static;

Now it is easy to set IP address, Subnet mask, Default gateway, Primary DNS and

Secondary DNS here.

Tones

You can configure different kinds of tones on your SK9500.

To enter the Tones mode

1. In standby mode, press to enter main menu;

2. Press and to select Settings;

3. Press and to select Tones;

To Change the Incoming Call Alert

You can define how you want your SK9500 to alert you with incoming calls:

Ringing: The handset will ring as long as the incoming call is active.

Ring once: The handset will ring only once.

Beep once: The handset will make one beep only on an incoming call.

Off: The handset will not make any voice on an incoming call.

1. Press to select Incoming call alert under Tones mode;

2. Press and or just to select your preferred alert type. (Ringing, Ring

once, Beep once, Off)

To Change the External Ring

1. Press and to select Incoming call alert under Tones mode;

2. Press and or just to select your preferred ring;

If you wish to set the External Vol., Internal Ring and Internal Vol., this is easily done

here.

To Adjust the Keypad Tones

1. Press and to select Keypad tones under Tones mode;

2. Press and to turn the keypad tones off or just to turn the keypad tones

on.