Operating instructions

21
is15sh_e_02.fm
[21/28]
Safety Precautions
The product has the following functions to protect the privacy of saved
data.
• Lock folder
• Osaifu-Keitai
®
lock setting
• Screen lock
• Restrict address book
■ PIN1 Code
To prevent unauthorized use of the micro au IC-Card by a third party,
you can set the product to require PIN1 code entry every time the
power is turned on. You also need to enter PIN1 code when setting
whether PIN1 code entry is required.
If PIN code is incorrectly entered three times consecutively, the PIN
code will be locked. You can unlock the PIN code using PUK code.
• PIN1 code is “1234” and PIN1 code entry is set to not be required at
the time of purchase. You can change PIN1 code to any four- to
eight-digit number, and set PIN1 code entry to be required as
necessary.
■ PUK Code
In case PIN1 code is locked, you can unlock it by entering PUK code.
• PUK code is an eight-digit number given at the time of purchase,
which is printed on the back side of the plastic card on which your
micro au IC-Card is attached.
• After entering PUK code, you need to set a new PIN1 code.
• If PUK code is incorrectly entered ten times consecutively, contact
an au shop, PiPit or Customer Service Center.
• “PIN1 code” is not reset by initializing the product.
Functions to Protect Your Privacy
PIN Code
memo
◎ When the PIN code is locked, the product may be restarted for the security
reasons.
is15sh_e.book 21 ページ ２０１２年７月２０日 金曜日 午後４時１８分