Operating instructions

12
is15sh_e_02.fm
[12/28]
Safety Precautions
The materials of parts used on the product are as follows.
The materials of parts used on the desktop holder are as follows.
CAUTION
Be sure to read the following
cautions before use.
Use of the main unit in an automobile sometimes affects on-vehicle
electronic devices, though this rarely happens. If this happens, stop
use since this may impair safe travel.
If you feel any abnormality with your skin, immediately consult a
dermatologist. Itching, rashes, eczema, etc. sometimes occurs
depending on your physical constitution and condition.
Part Material Surface treatment
Outer case (display
frame part)
PA resin Acrylic UV cured coating
Outer case (back of
display)
SUS/PC resin Baking coating/Unglazed
Outer case (key side at
the bottom)
PA resin (aluminium
inserted)
Acrylic UV cured coating
Outer case
(Surrounding part of key
side at the bottom
(including strap eyelet))
PA resin Acrylic UV cured coating
Battery cover PC resin Acrylic UV cured coating
Screw cover (back of
display)
PET Unglazed
External connection
jack cover
PC resin/Elastomer
resin
Acrylic UV cured coating
TV antenna PA resin
SUS
Zinc die-cast
None
None
Ni plating
Power key PC resin Acrylic UV cured coating
Volume up/down key PC resin Acrylic UV cured coating
Shutter key PC resin Acrylic UV cured coating
(tin-based deposition)
Display Hardened glass
(shatterproof sheet
of surface: PET)
Acrylic hard coating
Instruction
Instruction
Earpiece PET resin Acrylic UV cured coating
Out camera lens
decoration (including
infrared port window)
Acrylic resin Hard coating/Printing on the
back
Mobile light lens PC resin None
Operation keys PC resin Acrylic UV cured coating
Charger terminal SUS/ABS resin Gold plating (base: nickel)
Part Material Surface treatment
Outer case (front/rear) ABS resin None
Switching knob POM resin None
Contact lever POM resin None
Contact terminal Phosphor bronze Gold plating
Connection jack
(microUSB)
SUS Tin plating
Screw Carbon steels for
cold heading
Trivalent chromate
Rubber leg Polyurethane resin None
Locking lever (left/right) POM resin None
Do not bring the product close to magnetized objects such as cash
cards, floppy disks, credit cards, and prepaid cards. Doing so might
result in loss of recorded information.
Do not allow liquids, metal objects, burnable items, and other foreign
matter to get inside the microSD memory card slot. Doing so might
cause fire, electric shock or a fault.
Do not swing the product around by holding the strap, TV antenna,
etc. Doing so might cause an accident or damage.
Use the product with the covers of external connection jack, etc.
closed. If the covers are open, dirt or water may get inside causing a
fault.
Stow the TV antenna when not watching TV (1Seg). If you operate
the product for calling, etc. with the TV antenna extended, it might
cause unexpected injury by hitting your face, etc.
Part Material Surface treatment
Instruction
Instruction
is15sh_e.book 12 ページ ２０１２年７月２０日 金曜日 午後４時１８分