User manual

Page | 6

5.15~5.35GHz, 5.47~5.725GHz (Europe)
4.90~5.00GHz, 5.03~5.091GHz, 5.15~5.25GHz (Japan)
Modulation Technique:
OFDM and DSSS
OFDM: BPSK, QPSK, 16 QAM, 64QAM
RF Channels:
12 Non-Overlapping Channels
(4 Channels: 5.725 ~ 5.850 GHz)
Data Security:
64/128/152 bit WEP, TKIP, AES, IEEE 802.1x Authentication
Fully Transparent Bridge:
Unlimited MACs
(iii) Power Specifications:
Input Voltage: 110-240VAC
Power Output to Digital Board: 48VDC, 1A
(iv) Status Definition:
Item State Description
Power ON(Red) Power On
Off No Power
RF ON(Green) Connected
Off No Connection
Blinking(Green) Connected & Transmitting
LAN ON(Green) Connected
Off No Connection
Blinking(Green) Connected & Transmitting
RSSI Blinking from LED 1 to LED 5 Searching for AP
ON Connected & Showing Signal Strength
Note: the LED Indicators are common to all versions of Octopus 5800 Series
(v) Firmware Features:
• QoS (Quality of Service)
• Transmit Power Control
• WDS (Wireless Distribution System)
• ACK Timeout Settings
• CTS/RTS Configuration
• RSSI (Receiver Signal Strength Indication)
• Fragmentation Threshold
• Dual Band Radio Support
• DFS (Dynamic Frequency Selection)
• Bandwidth Management
• Spanning Tree Protocol (802.11d) Support
• Windows Connect Now Support
• DHCP Server/Client
• SNMP Management
• System Logging
• DTIM Frame Settings
• Beacon Settings
• MAC Based Filtering
• TFTP Firmware Upgrade