Instruction manual

FRONT PANEL

1. POWER ON SWITCH

The power switch turns the unit on and off. The LCM will illuminate blue to indicate the switcher is ON and receiving power. The switcher

will remember the last setting during a power cycle. When power is removed and resorted, the last conﬁ guration will be evoked.

2. INPUT STATUS DISPLAY

Input source 1 to 16 LED illuminate white to indicate a video source is present on that input.

3. OUTPUT STATUS DISPLAY

Each output (destination) channel shows which input (source) is assigned via LCM display.

4. DESTINATION SELECT BUTTONS

Separate outputs 1 thru 16 select buttons are provided for each destination assignment.

Routing can be Source to Destination or one source to multiple destinations.

Example: Press Destination 1, 3, 5, then press Source 2. The switcher will route Input 2 to Output 1,3,5 respectively.

5. EDID MODE SELECT BUTTONS

Use button #1 and #2 to select the desired EDID mode.

6. IR SENSOR

The IR sensor receives IR commands from the supplied remote controller or a third party IR emitter.

7. SOURCE SELECT BUTTONS

Input 1 thru 16 buttons are provided for each source selection.