Instruction manual

ManualsBrandsShinybow USA ManualsComputer equipmentSB-6335T

CONTENTS

INTRODUCTION ..............................................................1

FEATURES & SPECIFICATIONS...................................... 2

FRONT PANEL ................................................................ 3

REAR PANEL ................................................................ 6

REMOTE CONTROL ....................................................... 7

EDID FUNCTIONS ......................................................... 9

TYPICAL APPLICATION ............................................... 12

IR EXTENDER ............................................................... 14

RS-232 PROTOCOL .................................................... 16

LIMITED WARRANTY .................................................. 17

INTRODUCTION

The SB-8811 is high-performance 8x8 matrix routing switcher

for DVI (Digital Visual Interface) signals. This switcher supports

data rates up to 6.75 Gbps, enabling 1080p DVI formats and

UXGA/WUXGA/DVI resolution to any HD display. High Denition

Digital signals can be selected and distributed to any (8) outputs

simultaneously. The Switcher is certied as being fully DVI and

HDCP compliant, with RoHS, CE, FCC certication. Support high

resolution DVI sources routed to DVI displays, monitors, projector

or audio receivers. The EDID can be selected between (4)

different modes. Control is provided via front panel push buttons,

IR remote or via RS-232. An RS-232 Windows GUI interface is

provided for matrix routing.

PACKAGE CONTENTS

Check that you have the following components;

• SB-8811 Matrix Routing Switcher

• IR Remote Controller (SW-8811)

• 19 inch Ear mount bracket (Part # 1U-440L)

• IR Extender receiver (SB-100)

• CD Contents: This manual, Windows GUI

• RS-232 Cable

• Users Guide

• Power Supply: 12VDC, 5A Universal Type 50/60Hz,

100~230VAC

FULL HD DVI Matrix Switcher Series

Thank you for purchasing the SB-8811 DVI Matrix Switcher. You will nd this unit easy to install and highly

reliable but it is essential that you read this manual thoroughly before attempting to use this switcher.

TABLE OF CONTENTS

SAFETY PRECAUTIONS

Please read all instructions before attempting to unpack, install or

operate this equipment and before connecting the power supply.

Please keep the following in mind as you unpack and install this

equipment:

• Always follow basic safety precautions to reduce the risk of re,

electrical shock and injury to persons.

• To prevent re or shock hazard, do not expose the unit to rain,

moisture or install this product near water.

• Never spill liquid of any kind on or into this product.

• Never push an object of any kind into this product through any

openings or empty slots in the unit, as you may damage parts

inside the unit.

• Do not attach the power supply cabling to building surfaces.

• Use only the supplied power supply unit (PSU). Do not use the

PSU if it is damaged.

• Do not allow anything to rest on the power cabling or allow any

weight to be placed upon it or any person walk on it.

• To protect the unit from overheating, do not block any vents or

openings in the unit housing that provide ventilation and allow for

sufcient space for air to circulate around the unit.

DISCLAIMERS

The information in this manual has been carefully checked and

is believed to be accurate. We assume no responsibility for any

infringements of patents or other rights of third parties which may

result from its use.

We assume no responsibility for any inaccuracies that may be

contained in this document. We make no commitment to update

or to keep current the information contained in this document.

We reserve the right to make improvements to this document

and/or product at any time and without notice.

No part of this document may be reproduced, transmitted,

transcribed, stored in a retrieval system, or any of its part translated

into any language or computer le, in any form or by any means

— electronic, mechanical, magnetic, optical, chemical, manual,

or otherwise — without express written permission and consent

Version 2.0 APR 2015

8811-20120901-001

TRADEMARK ACKNOWLEDGMENTS

All products or service names mentioned in this document may

be trademarks of the companies with which they are associated.