Instruction manual
EDID function : 4x Embedded EDID Modes
Mode 1. FSS (Fast Speed Start) Automatic capture most suitable EDID from Destination to Source.
Mode 2. 1280x1024-60Hz (DVI-D) DVI Support : DVI-D 1280x1024 - 60Hz
Mode 3. 1920x1200-60Hz (DVI-D) DVI Support : DVI-D 1920 x 1200 - 60Hz
Mode 4. AUTO <Default> All Outputs will be set to the highest common resolution of all connected
display devices.
EDID FUNCTION : LEARNING
Learning EDID Single to Single Example : Learn Destination #8 EDID To Source #5.
Step 1. Press EDID button
Example : Learn Destination #8 EDID To Source #5.
The button will ash blue and the display will show the current Embedded
EDID Status.
Step 2. Press the Destination #8 button row Copy the Destination #8 Display EDID.
Step 3. Press the Source #5 button row Learning the Destination #8 EDID To Source # 5.
Step 4. Press ENTER button To conrm entries.
Learning EDID Single to multiple Learning destination EDID link to the majority Sources
Step 1. Press EDID button The button will ash blue and the display will show the current Embedded
EDID Status.
Step 2. Press the Destinations #1~8 button row Copy any 1~8 Destinations EDID.
Step 3. Press the Source #1, #6,~#8 button row Learning the Destination EDID link to source #1,#6,~#8 .
Step 4. Press ENTER button To conrm entries.
Learning EDID Single to ALL Learning destination EDID link to All Sources
Step 1. Press EDID button The button will ash blue and the display will show the current Embedded
EDID Status.
Step 2. Press destination button 1 thru 8 Learning anyone 1~8 Destination EDID to all sources
Step 3. Press ALL button Learning selected destination EDID to all sources.
Step 4. Press ENTER button To conrm entries.
10
EDID FUNCTION