Instruction manual

FEATURES & SPECIFICATIONS

FEATURES

• HDBaseT Transmitter Extend the HDMI over single CAT5e/6/6a category 100M LAN cable.

• Transmit signals HDMI, IR in/out and RS-232 I/O series interface.

• Single category cable via using the CAT6, CAT6a and CAT7 (UTP or FTP) cable.

• Support link speeds of up to 3.4 Gbps, HDMI 1.4, full HD 4K2K signal, HDCP compliant.

• Support Digital RGB 36bits, HDMI digital video TMDS, digital multi-channel audio format.

• Extension higher quality full HD DVI video WUXGA 1920x1200 resolution.

• Support High Deﬁ nition worldwide range resolution 480p, 720p 1080i/1080p-60Hz and 4K2K.

• Extend long distance 328 feet (100M) between HDBaseT Transmitter and Receiver.

• Support wall mount install total 10 pcs. into one 19 inch 4U Rack mountable.

• Power input via DC with Low power consumes (Full load 750mA)

• Power supply using universal power switch 50/60Hz,100~240VAC.

SPECIFICATIONS

• Type of Extender: HDBaseT Transmitter for HDMI over single category 100M Cable

• Input Signals: HDMI with Digital Video(TMDS)/Audio 0.5~1.0vPP, DDC 5Vpp

• HDBaseT Supports: HDMI 1.4 Standard, DVI and HDCP Compliant

• Video Support: HDMI and DVI TMDS format for 1920x1200 resolution up to 3.4 Gbps Digital RGB 36bits deep color, 3D 1.4a HDMI format

• Audio I/O Supports: Multi-channel Audio Formats 5.1 / 7.1, MAT(MLP), Dolby Digital, Dolby TrueHD, Dolby Digital Plus, DTS, DTS-

ES 6.1, DTS-HD, DTS-HD-HRA, DTS-HD Master, (PCM-2CH)

• Extend Distance: Up to 328 feet (100 meters) via (UTP or FTP CAT6 100m cable)

• Cable Support: CAT6, CAT6a, CAT7 use UTP or FTP category cable

• Support HDMI Resolution: 480p, 720p 1080i/1080p@60Hz or 4K2K@24Hz

• Scan Rate Accepted: Support HDMI full HD Resolutions; Frequency 24Hz to 60Hz

• Control: 1x IR in, 1x IR out and 1x RS-232 I/O series interface

• IR Infrared Frequency: 38Khz

• Safety Approvals: CE, FCC, VCCI, REACH & WEEE

• Dimensions (LxWxH): 5.12 x 3.14 x 1.14 in (130mm x 80mm x 29mm)

• Wall Mount: Wall mount pack (p/n:VM-1inch-L80MM)

• Rack Mount : Total 10 pcs install into 19 inch 4U Rack mountable

• Shipping Weight: 0.375 kgs / 0.825 lb

• Power Consumption: Max. 750mA. (Full load 1080p-60Hz signal with use DC12V input)

• Power Supply: Power Input +12VDC, 2A, (Universal Type 50/60Hz, 100~240 VAC)

OPTIONAL ACCESSORIES

(1) 1x SB-100 set (IR Receiver Extender assy plug).

(2) 1x SB-100C cable (IR Receiver Cable).

(3) 1x SB-101 set (IR Transmitter Extender assy plug).

(4) 1x SB-101C cable (IR Transmitter Cable).

(5) 1x 1 inch High Wall mount pack (Part # WM-1INCH-L80MM).

(6) 1x CAT6 Category cable distance 328 feet (100 M), (P/N: UTP6-100)

As product improvements are continuous, speciﬁ cations are subject to change and without notice.