Instruction manual

ManualsBrandsShinybow USA ManualsComputer equipmentSB-6335T

CONFORMANCE TEST REPORT

FOR

EN 61000-6-1 / EN 61000-6-3

REPORT NUMBER: 09-07-MAS-282-18-R

FOR

FCC 47 CFR/Part 15 Subpart B

Report Number: 09-07-MAS-282-19-R

Model Number: SB-6335T

Comment Number : SB-6215, SB-6215R, SB-6215RE,

SB-6220R SB-6220RE, SB-6240R, SB-6240RE, SB-6335,

SB-6335R, SB-6320, SB-6320R

Input: HDMI ((with DVI -Audio)

Output: HDBaseT via CAT6/6a/7 Cable

Power Input: +DC12V , 2A

TABLE OF CONTENTS

SAFETY PRECAUTIONS

Please read all instructions before attempting to unpack, install or

operate this equipment and before connecting the power supply.

Please keep the following in mind as you unpack and install this

equipment:

• Always follow basic safety precautions to reduce the risk of ﬁ re,

electrical shock and injury to persons.

• To prevent ﬁ re or shock hazard, do not expose the unit to rain,

moisture or install this product near water.

• Never spill liquid of any kind on or into this product.

• Never push an object of any kind into this product through any

openings or empty slots in the unit, as you may damage parts

inside the unit.

• Do not attach the power supply cabling to building surfaces.

• Use only the supplied power supply unit (PSU). Do not use the

PSU if it is damaged.

• Do not allow anything to rest on the power cabling or allow any

weight to be placed upon it or any person walk on it.

• To protect the unit from overheating, do not block any vents or

openings in the unit housing that provide ventilation and allow

for sufﬁ cient space for air to circulate around the unit.

DISCLAIMERS

The information in this manual has been carefully checked and

is believed to be accurate. We assume no responsibility for any

infringements of patents or other rights of third parties which may

result from its use.

We assume no responsibility for any inaccuracies that may be

contained in this document. We make no commitment to update or

to keep current the information contained in this document.

We reserve the right to make improvements to this document and/

or product at any time and without notice.

No part of this document may be reproduced, transmitted,

transcribed, stored in a retrieval system, or any of its part translated

into any language or computer ﬁ le, in any form or by any means

— electronic, mechanical, magnetic, optical, chemical, manual, or

otherwise — without express written permission and consent

Version 2.2 MAR 2014

TRADEMARK ACKNOWLEDGMENTS

All products or service names mentioned in this document may

be trademarks of the companies with which they are associated.

CONTENTS

INTRODUCTION & PACKAGE CONTENTS ......................1

FEATURES & SPECIFICATIONS ..................................... 2

TYPICAL HOOKUP AND OPERATION ............................ 3

RACK MOUNTS (OPTIONAL) .......................................... 4

IR EXTENDER ................................................................. 6

INTRODUCTION

Congratulations on your purchase of one of the most innovative

HDMI 1.4a over single category cable Transmitter with RS-232 on

the market today. SB-6335T HDBaseT Transmitter can transmit

the HDMI signal, IR Remote signals input or output and RS-232 I/O

series interface to the other size HDBaseT Receiver (SB-6335R)

via single category LAN cable for the long distance Maximum 328

feet (100M). Transmitter use the single CAT6, CAT6a or CAT7

(UTP/FTP) category cable via RJ-45 8P8C female socket. The

LAN cable support the 568a or 568b LAN color speciﬁ cation table.

This product provide higher full HD HDMI 1.4a, HDTV Resolution

supports 480i/p, 720p,1080i/p or High 4K2K quality that are

identical to the source high quality full HDMI 1.4 signals. The

Transmitter is useful for sending the HDMI digital Video & digital

multi-channel audio format signals, IR remote in or IR remote

out, RS-232 series in and RS-232 series out. Controls signals via

single category cable transmit to the HDBaseT Receiver.

PACKAGE CONTENTS

Check that you have the following components;

• SB-6335T HDBaseT Transmitter console

• Users Guide

• AC/DC Adapter: 12VDC/2A (universal power switch 50/60Hz,

100~240VAC)