Instruction manual

ManualsBrandsShinybow USA ManualsComputer equipmentSB-6335T

TABLE OF CONTENTS

SAFETY PRECAUTIONS

Please read all instructions before attempting to unpack, install or

operate this equipment and before connecting the power supply.

Please keep the following in mind as you unpack and install this

equipment:

• Always follow basic safety precautions to reduce the risk of ﬁ re,

electrical shock and injury to persons.

• To prevent ﬁ re or shock hazard, do not expose the unit to rain,

moisture or install this product near water.

• Never spill liquid of any kind on or into this product.

• Never push an object of any kind into this product through any

openings or empty slots in the unit, as you may damage parts

inside the unit.

• Do not attach the power supply cabling to building surfaces.

• Use only the supplied power supply unit (PSU). Do not use the

PSU if it is damaged.

• Do not allow anything to rest on the power cabling or allow any

weight to be placed upon it or any person walk on it.

• To protect the unit from overheating, do not block any vents or

openings in the unit housing that provide ventilation and allow

for sufﬁ cient space for air to circulate around the unit.

DISCLAIMERS

The information in this manual has been carefully checked and

is believed to be accurate. We assume no responsibility for any

infringements of patents or other rights of third parties which may

result from its use.

We assume no responsibility for any inaccuracies that may be

contained in this document. We make no commitment to update or

to keep current the information contained in this document.

We reserve the right to make improvements to this document and/

or product at any time and without notice.

No part of this document may be reproduced, transmitted,

transcribed, stored in a retrieval system, or any of its part translated

into any language or computer ﬁ le, in any form or by any means

— electronic, mechanical, magnetic, optical, chemical, manual, or

otherwise — without express written permission and consent

Version 1.5 MAR 2014

TRADEMARK ACKNOWLEDGMENTS

All products or service names mentioned in this document may

be trademarks of the companies with which they are associated.

CONTENTS

INTRODUCTION ............................................................... 1

FEATURES & CONTENTS ................................................ 2

SPECIFICATIONS .............................................................3

FRONT PANEL ..................................................................4

REAR PANEL ....................................................................7

REMOTE CONTROL ........................................................9

RS-232 SERIAL INTERFACE .........................................12

EDID FUNCTIONS ..........................................................13

TYPICAL APPLICATION ...............................................16

IR EXTENDER .................................................................19

LIMITED WARRANTY ....................................................21

INTRODUCTION

The SB-5645CT is high-performance 4x4 matrix routing switcher

with four (4) HDMI inputs and supports simultaneously four (4)

HDMI and four (4) HDBaseT Outputs. The SB-5645CT is based

on HDBaseT technology and that supports full resolution HDMI

Video with embedded audio, RS-232, and IR bi-directional all over

a single CAT5e/6/7 cable. With a signal bandwidth of 340Mhz,

there is no signal degradation. High Deﬁ nition Digital signals can

be selected and distributed to any 8 outputs simultaneously (4x

channels x2). The Switcher is certiﬁ ed as being fully CEC and

HDCP 2.0 compliant, HDMI V1.4a 3D formats, data rates up to

6.75 Gbps. Supports UXGA/WUXGA/DVI 1920x1200 resolutions

to any HD displays. The SB-5645CT has one CAT5e/6/7 and HDMI

connector for each output, effectively making this an 4x8 switcher

(same signal on both channel outputs). One RJ-45 connection

on each output extends the HDMI signal to remote locations via

HDBaseT Receiver SB-6335R. The EDID can be selected between

seven (7) different modes. Control is provided via Front panel

push buttons, IR remote or via RS-232. An RS232 Windows GUI

interface is provided for matrix routing.

Member of the HDBaseT Alliance

Products support HDBaseT Speciﬁ cations