Instruction manual

ETHERNET SERIAL INTERFACE
ETHERNET SERIAL INTERFACE CONNECT A PC OR CONTROL SYSTEM. VERSION COMPATIBLE V2.0
For a complete list of commands, please reference external document extended Ethernet Protocol Instruction Manual.
ETHERNET SERIAL INTERFACE
Pin Ethernet Reference
1 TXOP TX +
2 TXON TX -
3 RXIP RX +
4NC
5NC
6 RXIN RX -
7NC
8 GND
ETHERNET TCP/IP PROTOCOL COMMANDS ( Ethernet / RS-232 Control driver V2.0.1 )
*** The Ethernet port and RS-232 port cannot be used simultaneously.
Any connection to the Ethernet Control port will disable serial commands send to the RS-232 port.***
17
Note :
Control the switcher
SPD : Speed
LINK : Ethernet link
RJ-45 Female 8P-8 Connector