Instruction manual

EDID FUNCTION
EDID FUNCTION : 8X EMBEDDED EDID MODES
Mode 1. FSS (Fast Speed Start)
Fast Speed Start mode shortens the startup time of the switcher. Selecting this
mode does not force the EDID setup to be cancelled. Users may fi rst select
one EDID mode from mode 2 to 3, and then select mode 1 for fast speed start.
Mode 5. H36-3D-M (1080p-36 bits)
Video Support : All resolutions up to and including 1080p.
Audio Support : MAT(MLP) 7.1CH, PCM 2CH, One Bit Audio 2CH, AC-3
5.1CH, DTS 5.1CH, PCM 7.1CH, Dolby Digital + 7.1CH, DTS-HD 7.1CH
Mode 2. H24-3D (1080p-24 bits)
Video Support : All resolutions up to and including 1080p.
Audio Support : PCM 2CH
Mode 6. 1280x1024-60Hz (DVI-D)
DVI Support : DVI-D 1280x1024 60Hz
Mode 3. H24-3D-M (1080p-24bits)
Video Support : All resolutions up to and including 1080p.
Audio Support : MAT(MLP) 7.1CH, PCM 2CH, One Bit Audio 2CH, AC-3
5.1CH, DTS 5.1CH, PCM 7.1CH, Dolby Digital + 7.1CH, DTS-HD 7.1CH
Mode 7. 1920x1200-60Hz (DVI-D)
DVI Support : DVI-D 1920 x 1200 60Hz
Mode 4. H36-3D (1080p-36 bits)
Video Support : All resolutions up to and including 1080p.
Audio Support : PCM 2CH
Mode 8. AUTO <Default>
Video Support : All resolutions up to and including 1080p.
All Outputs will be set to the highest common resolution of all connected
display devices.
EDID FUNCTION : LEARNING
Learning EDID Single to Single Example : Learn Destination #8 EDID To Source #5.
Step 1. Press EDID button
The button will fl ash blue and the display will show the current
Embedded EDID Status.
Step 2. Press the Destination #8 button row Copy the Destination #8 Display EDID.
Step 3. Press the Source #5 button row Learning the Destination #8 EDID to Source # 5.
Step 4. Press ENTER button To confi rm entries.
Learning EDID Single to Multiple Learning destination EDID link to the majority Sources
Step 1. Press EDID button
The button will fl ash blue and the display will show the current
Embedded EDID Status.
Step 2. Press the Destinations #1 ~ 8 button row Copy any 1~8 Destinations EDID.
Step 3. Press the Source #1, #6~#8 button row Learning the Destination EDID link to Source #1, #6 ~ #8 .
Step 4. Press ENTER button To confi rm entries.
Learning EDID Single to ALL Learning destination EDID link to All Sources
Step 1. Press EDID button
The button will fl ash blue and the display will show the current
Embedded EDID Status.
Step 2. Press destination button 1 thru 8 Learning anyone 1~8 Destination EDID to all sources.
Step 3. Press ALL button Learning selected destination EDID to all sources.
Step 4. Press ENTER button To confi rm entries.
10