Instruction manual

EDID FUNCTION

EDID FUNCTION FOR HDMI MATRIX SWITCHER

Learning EDID Single to Single Example : Learn Destination #2 EDID To Source #3.

Step 1 . Press EDID button The button will ﬂ ash blue and the display will show the current Embedded EDID Status.

Step 2 . Press the Destination #4 button row Copy the Destination #5 Display EDID.

Step 3 . Press the Source #8 button row Learning the Destination #4 EDID To Source # 8.

Step 4 . Press ENTER button To conﬁ rm entries.

Learning EDID Single to multiple Learning destination EDID link to the majority Sources

Step 1 . Press EDID button The button will ﬂ ash blue and the display will show the current Embedded EDID Status.

Step 2 . Press the Destinations #1~4 button row Copy any 1~4 Destinations EDID.

Step 3 . Press the Source #1, #6,~#8 button row Learning the Destination EDID link to source #1,#6,~#8 .

Step 4 . Press ENTER button To conﬁ rm entries.

Learning EDID Single to ALL Learning destination EDID link to All Sources

Step 1 . Press EDID button The button will ﬂ ash blue and the display will show the current Embedded EDID Status.

Step 2 . Press destination button 1 thru 4 Learning anyone 1~4 Destination EDID to all sources.

Step 3 . Press ALL button Learning selected destination EDID to all sources.

Step 4 . Press ENTER button To conﬁ rm entries.

EDID status To view the current EDID status.

Step 1 . Press EDID button The button will ﬂ ash blue and the display will show the current Embedded EDID Status.

Step 2 . Press EDID button To exit.

How to setup FSS

Function Fast Speed Start

Step 1 . Press the Destination #1~4 button row

Then Press the Source #1~8 button row

To setup and Install all devices.

Step 2 . Press EDID button Select a optimum status of Embedded EDID mode.

Step 3 . Press ENTER button To conﬁ rm entries.

Step 4 . Press EDID button To select the EDID FSS

mode.

Step 5 . Press ENTER button To conﬁ rm entries.

LEARNING EDID deﬁ nition Learning EDID from Destination to Source

1. Switcher will LEARN destination EDID and pass the selected source.

2. To set up learning between a single destination and single source: Press EDID button > Press Destination 1 thru 4 > Press Source

1 thru 8 > Press ENTER to conﬁ rm. Switcher will learn destination EDID to source device.

3. To set up learning between a single destination and Multiple sources: Press EDID button > Press Destination 1 thru 4 > Press the

majority Sources 1 thru 8 > Press ENTER. Switcher will learn single destination EDID to many source devices.

4. How to Learning single destinations with all sources. Press EDID button > Press ALL button > Press ENTER to conﬁ rm.

Auto mode deﬁ nition Common Resolution and Audio

Switcher will ﬁ nd highest common Resolution and Audio from all destination EDID to link Source.

Example for single source:

Destination > press #1 and then Source > press #1 Destination device #1 will set to the highest common resolution and Audio of source #1

Example for multiple sources

Destination device #1, #2, #3 will be set to the highest common resolution and Audio available and source device #1 will output this same

resolution.