Instruction manual

EDID FUNCTION

Mode 6. 1280x1024-60Hz (DVI-D) DVI Support : DVI-D 1280x1024 60Hz

Mode 7. 1920x1200-60Hz (DVI-D) DVI Support : DVI-D 1920 x 1200 60Hz

Mode 8. AUTO <Default> All Outputs will be set to the highest common resolution of all connected

display devices.

EDID FUNCTION FOR HDMI MATRIX SWITCHER

RESET EDID Return To Factory default

How to RESET EDID mode

Press EDID > SOURCE > ENTER

To RESET the FACTORY DEFAULT (1080p-2CH).

Press EDID button : The LCM will show the current EDID status.

Press RECALL button : The LCM will show the RESET EDID.

Press ENTER to conﬁ rm entries.

The EDID will return to FSS mode and resolution 1080p-2CH.

LEARNING EDID Learning EDID from Destination to Source

Learning EDID setup

Press EDID > DESTINATION > SOURCE > ENTER

.Press: EDID > DESTINATION #1 >

Switcher will LEARN destination #1 EDID and pass the selected source.

NOTE : The already learned EDID cannot be modiﬁ ed. You can only rebuild a new Learning EDID.

For example; When the Source has “Learned” the EDID data from a destination, It will save that EDID information into EPROM and

the EDID data cannot change.

Please select new learning destination to sources or change to one of the embedded EDID modes when you want to remove the learn-

ing EDID memory from EPRPM.