Instruction manual

EDID FUNCTION

EDID FUNCTION SETUP

EDID Setup To change the EDID setup

Step 1 . Press the EDID button The display will show the currently selected EDID mode

Step 2 . Press SOURCE #1 or #2 button row The button will ﬂ ash blue and the display will show the current Embedded

EDID Status.

Step 3 . Press the ENTER button To set EDID mode. The switcher will return to operation mode.

Operation will abort if no keys are pressed within 5 seconds.

Embedded EDID modes Total 8 EDID Modes

Embedded EDID setup

Press EDID > SOURCE > ENTER

SOURCE #1 or SOURCE #2

To select Embedded EDID mode or LEARNING mode.

Press EDID button : The LCM will show the current EDID status.

Repeatedly depressing the source 1 button will cycle up thru the options.

Repeatedly depressing the source 2 button will cycle down thru the options.

Embedded EDID :

Mode 1 : FSS

Mode 2 : H24-3D

Mode 3 : H24M-3D

Mode 4 : H36-3D

Mode 5 : H36M-3D

Mode 6 : DVI 1280x1024-60Hz

Mode 7 : DVI 1920x1200-60Hz

Mode 8 : AUTO

EDID FUNCTION : 8X EMBEDDED EDID MODES

EDID Function 8x Embedded EDID Modes

Mode 1. FSS (Fast Speed Start) Video Support : All resolutions up to and including 1080p.

Automatic capture of the most suitable EDID from Destination to Source.

Mode 2. H24-3D (1080p-24 bits) Video Support : All resolutions up to and including 1080p.

Audio Support : PCM 2CH

Mode 3. H24-3D-M (1080p-24bits) Video Support : All resolutions up to and including 1080p.

Audio Support :

MAT(MLP) 7.1CH, PCM 2CH, One Bit Audio 2CH, AC-3 5.1CH, DTS

5.1CH, PCM 7.1CH, Dolby Digital + 7.1CH, DTS-HD 7.1CH

Mode 4. H36 (1080p-36 bits) Video Support : All resolutions up to and including 1080p.

Audio Support : PCM 2CH

Mode 5. H36-M (1080p-36 bits) Audio Support :

MAT(MLP) 7.1CH, PCM 2CH, One Bit Audio 2CH, AC-3 5.1CH, DTS

5.1CH, PCM 7.1CH, Dolby Digital + 7.1CH, DTS-HD 7.1CH