Instruction manual

FEATURES & SPECIFICATIONS

FEATURES

• HDBaseT HDMI Receiver over single CAT6/6a/7 category LAN cable.

• Extend for HDMI, IR in/out and RS-232 series interface in/out with HDCP compliant.

• Support category cable via using the CAT6, CAT6a and CAT7 UTP/FTP cable.

• Support link speeds of up to 3.4 Gbps

• Support Digital RGB 36bits, V1.4a HDMI TMDS format.

• Extension higher quality DVI video 1920x1200 resolution.

• Support HD High Deﬁ nition full range resolution 480p, 720p 1080i/1080p and 4k2k.

• Support long distance 100M between HDBaseT Transmitter and HDBaseT Receiver.

• Support wall mount pack and rack mount install for 19 inch 4U Rack mountable.

• Power support DC input with Low power consumes (Full load 850mA)

• Power supply using universal power switch 50/60Hz,100~240VAC.

SPECIFICATIONS

• Type of Extender: HDBaseT Receiver for HDMI signal over one category LAN Cable

• Input Signals: HDMI with Digital Video(TMDS)/Audio 0.5~1.0vPP, DDC 5Vpp

• HDBaseT Supports: HDMI Standard, DVI and HDCP Compliant

• Video Support: HDMI and DVI TMDS format for 1920x1200 resolution up to 3.4 Gbps Digital RGB 36bits deep color, 3D 1.4a HDMI format

• HDMI Audio Out Supports: Multi-channel Audio Formats 5.1 / 7.1, MAT(MLP), Dolby Digital, Dolby TrueHD, Dolby Digital Plus,

DTS, DTS-ES 6.1, DTS-HD, DTS-HD-HRA, DTS-HD Master, (PCM-2CH)

• RS-232 Series Support: 1x RS-232 series interface port (Terminal Block 3pin female socket).

• Category Cable Support: CAT6, CAT6a, CAT7 UTP/FTP cable

• Support HDMI Resolution: 480p, 720p, 1080i/1080p, 4k2k

• Scan Rate Accepted: Support HDMI full HD Resolutions; Frequency 24Hz to 60Hz

• Control: 1x IR in/out, 1x IR in/out, 1x RS-232 and 1x LAN series interface

• IR Infrared Frequency: 38Khz

• Extend Distance: Up to 100M (CAT6)

• Safety Approvals: CE, FCC, VCCI, REACH & WEEE

• Dimensions (LxWxH): 3.15 x 5.12 x 1 in (80mm x 130mm x 26mm)

• Rack Mount : Use total 10 pcs install into one 19 inch rack mountable

• Shipping Weight: 0.325 kgs / 0.715 lb

• Power Consumption: Max. 750mA. (Full load 1080p-60Hz signal with use DC12V input)

• Power Supply: Power Input +12VDC, 2A, (Universal Type 50/60Hz, 100~240 VAC)

PACKAGE CONTENTS

Check that you have the following components;

• SB-6335R HDBaseT Receiver console

• SB-100C IR Receiver w/ attached cable (2x)

• SB-101C IR Emitter w/attached cable (2x)

• SB-100 IR Receiver w/assembly plug (2x)

• SB-101 IR Emitter w/assembly plug (2x)

• 1 inch High Wall mount pack (Part # WM-1INCH-L80MM) (2x)

• Users Guide

• AC/DC Adapter: 12VDC/2A (universal power switch 50/60Hz, 100~240VAC) (2x)

As product improvements are continuous, speciﬁ cations are subject to change and without notice.