Instruction manual

ManualsBrandsShinybow USA ManualsComputer equipmentSB-6335R

CONFORMANCE TEST REPORT

FOR

EN 61000-6-1 / EN 61000-6-3

REPORT NUMBER: 09-07-MAS-282-18-R

FOR

FCC 47 CFR/Part 15 Subpart B

Report Number: 09-07-MAS-282-19-R

Model Number: SB-6335R

Comment Number : SB-6215, SB-6215R, SB-6215RE,

SB-6220R SB-6220RE, SB-6240R, SB-6240RE, SB-6335,

SB-6335R, SB-6320, SB-6320R

Input: HDBaseT CAT6/6a/7 single cable

Output: HDMI & RS-232 series interface

Power Input: +DC12V , 2A

TABLE OF CONTENTS

SAFETY PRECAUTIONS

Please read all instructions before attempting to unpack, install or

operate this equipment and before connecting the power supply.

Please keep the following in mind as you unpack and install this

equipment:

• Always follow basic safety precautions to reduce the risk of ﬁ re,

electrical shock and injury to persons.

• To prevent ﬁ re or shock hazard, do not expose the unit to rain,

moisture or install this product near water.

• Never spill liquid of any kind on or into this product.

• Never push an object of any kind into this product through any

openings or empty slots in the unit, as you may damage parts

inside the unit.

• Do not attach the power supply cabling to building surfaces.

• Use only the supplied power supply unit (PSU). Do not use the

PSU if it is damaged.

• Do not allow anything to rest on the power cabling or allow any

weight to be placed upon it or any person walk on it.

• To protect the unit from overheating, do not block any vents or

openings in the unit housing that provide ventilation and allow

for sufﬁ cient space for air to circulate around the unit.

DISCLAIMERS

The information in this manual has been carefully checked and

is believed to be accurate. We assume no responsibility for any

infringements of patents or other rights of third parties which may

result from its use.

We assume no responsibility for any inaccuracies that may be

contained in this document. We make no commitment to update or

to keep current the information contained in this document.

We reserve the right to make improvements to this document and/

or product at any time and without notice.

No part of this document may be reproduced, transmitted,

transcribed, stored in a retrieval system, or any of its part translated

into any language or computer ﬁ le, in any form or by any means

— electronic, mechanical, magnetic, optical, chemical, manual, or

otherwise — without express written permission and consent.

Version 2.3 APR 2014

TRADEMARK ACKNOWLEDGMENTS

All products or service names mentioned in this document may

be trademarks of the companies with which they are associated.

CONTENTS

INTRODUCTION ...............................................................1

FEATURES & SPECIFICATIONS ..................................... 2

PACKAGE CONTENTS ..................................................... 2

TYPICAL HOOKUP AND OPERATION ............................. 3

RACK MOUNTS (OPTIONAL) ........................................... 4

IR EXTENDER ................................................................. 6

INTRODUCTION

Congratulations on your purchase of one of the most innovative

HDMI over HDBaseT with RS-232 Receiver on the market today.

The HDBaseT Receiver can receive the HDMI, IR in, IR remote

out and RS-232 I/O signals from HDBaseT Transmitter via a

single category cable for long distance maximum 328 feet (100

meters). SB-6335R use single category LAN cable CAT6, CAT6a

or CAT7 (UTP or FTP) with RJ-45 8P8C connector and Support

568a or 568b color speciﬁ cation table. This HDBaseT receiver

product provide the higher full HD HDMI resolutions 480i/p,

720p,1080i/p and 4k2k quality that are identical to the source to

the HD destination display. Receive signals are useful the HDMI

digital Video, digital multi-channel audio signals, IR in, IR out and

RS-232 series interface via single category cable from HDBaseT

Transmitter.