M U LT IM EDIA AUDIO A ND V IS UA L INSTRUCTION MANUAL MODEL : SB-6335R HDBaseT Receiver HDMI HDBaseT EXTENDER Receiver with RS-232 HDBaseT with Ethernet 100M EXTENDER Series Thank you for purchasing the SB-6335R HDBaseT with RS-232 Receiver. You will find this unit easy to install and highly reliable but it is essential that you read this manual thoroughly before attempting to use Extender.
SAFETY INFORMATION 1. To ensure the best results from this product, please read this manual and all other documentation before operating your equipment. Retain all documentation for future reference. 2. Follow all instructions printed on unit chassis for proper operation. 3. To reduce the risk of fire, do not spill water or other liquids into or on the unit, or operate the unit while standing in liquid. 4. Make sure power outlets conform to the power requirements listed on the back of the unit.
TABLE OF CONTENTS CONTENTS SAFETY PRECAUTIONS INTRODUCTION ...............................................................1 Please read all instructions before attempting to unpack, install or operate this equipment and before connecting the power supply. Please keep the following in mind as you unpack and install this equipment: FEATURES & SPECIFICATIONS ..................................... 2 PACKAGE CONTENTS .....................................................
FEATURES & SPECIFICATIONS FEATURES • • • • • • • • • • • HDBaseT HDMI Receiver over single CAT6/6a/7 category LAN cable. Extend for HDMI, IR in/out and RS-232 series interface in/out with HDCP compliant. Support category cable via using the CAT6, CAT6a and CAT7 UTP/FTP cable. Support link speeds of up to 3.4 Gbps Support Digital RGB 36bits, V1.4a HDMI TMDS format. Extension higher quality DVI video 1920x1200 resolution. Support HD High Definition full range resolution 480p, 720p 1080i/1080p and 4k2k.
TYPICAL HOOKUP AND OPERATION FRONT PANEL: SB-6335R 1. Status via LED Show out : POWER, LINK & HDCP REAR PANEL: SB-6335R 5. DC input : DC12V, 2A 6. IR IN : Send IR signal to HDBaseT Transmitter 7. IR OUT : Receive IR signal from HDBaseT Transmitter via IR External Receiver SB-100) 8. RJ-45 IN : HDBaseT input , Signal from the HDBaseT Transmitter 9. HDMI OUT : HDMI output , Signal to HDMI destination display device 10.
RACK MOUNT (optional) SB-6069 SB-6335T/SB-6335R 19 INCH 4U-10 UNITS RACK MOUNT Model No. : #4U-10p-L130MM SB-6335T/SB-6335R 4U Ear mount pairs Parts No.: MEER6069ER13000 Model No. : #4U-10p-L130MM-COV SB-6335T/SB-6335R 4U Ear mount pairs Parts No.: MEER6069ER11000 Model No. : #4U-10p-L80MM-EAR SB-6335T/SB-6335R 4U Ear mount pairs Parts No.
RACK MOUNT (optional) SB-6069 Complete 19 inch 4U rack mount Install (10 units) Application : SB-6335T/SB-6335R SB-6335T/SB-6335R : Wall mount accessories Model No. : #WM-1INCH-L80MM SB-6335T/SB-6335R Wall mount pairs Parts No.
IR EXTENDER IR RECEIVER: 1. SB-100 IR 300M Receiver Device Cable (3C) IR Receiver (SB-100) R oHS /95/E C IR E XT. in RS - 232 IR EXT . INP UT DC 12V 4 3 UT 4 -2 3 -4 UT IR 2 R IX IN P I MAT SW 1 HDM 1 S WIT UT 2 IN P 1 SB-100 C HE -3 R 3 UT ER 2 IN P P OW 2 ON 1 IN P IR Rx OFF -1 3 4 4 R S -232 SB-100 IR Receiver Set 2.
IR EXTENDER IR EMITTER: 1. SB-101 IR 300M Transmitter DC 12V Device Cable (3C) IR out IR in CAT6/6a/7 From Receiver To Receiver OUTPUT IR Transmitter (SB-101) R oHS /95/E C IR Tx SB-101 SB-101 IR Transmitter Set 2.
LIMITED WARRANTY PLEASE READ THE FOLLOWING TERMS AND CONDITIONS CAREFULLY BEFORE USING THIS HARDWARE, COMPONENTS AND SOFTWARE PROVIDED BY, THROUGH OR UNDER SHINYBOWUSA, INC (COLLECTIVELY, THE “PRODUCT”). By using installing or using the Product, you unconditionally signify your agreement to these Terms and Conditions. If you do not agree to these Terms and Conditions, do not use the Product and return the Product to SHINYBOWUSA, Inc.
M U LT IM ED IA AUDIO A ND V IS UA L 122 Rose Ln. Suite 303 | Frisco, Texas 75034 1-877-SHINY-USA 1-877-744-6987 1-972-377-2508 sales@shinybowusa.com www.shinybowusa.
