Instruction manual

ManualsBrandsShinybow USA ManualsComputer equipmentSB-6310R

TABLE OF CONTENTS

SAFETY PRECAUTIONS

Please read all instructions before attempting to unpack, install or

operate this equipment and before connecting the power supply.

Please keep the following in mind as you unpack and install this

equipment:

• Always follow basic safety precautions to reduce the risk of ﬁ re,

electrical shock and injury to persons.

• To prevent ﬁ re or shock hazard, do not expose the unit to rain,

moisture or install this product near water.

• Never spill liquid of any kind on or into this product.

• Never push an object of any kind into this product through any

openings or empty slots in the unit, as you may damage parts

inside the unit.

• Do not attach the power supply cabling to building surfaces.

• Use only the supplied power supply unit (PSU). Do not use the

PSU if it is damaged.

• Do not allow anything to rest on the power cabling or allow any

weight to be placed upon it or any person walk on it.

• To protect the unit from overheating, do not block any vents or

openings in the unit housing that provide ventilation and allow

for sufﬁ cient space for air to circulate around the unit.

DISCLAIMERS

The information in this manual has been carefully checked and

is believed to be accurate. We assume no responsibility for any

infringements of patents or other rights of third parties which may

result from its use.

We assume no responsibility for any inaccuracies that may be

contained in this document. We make no commitment to update or

to keep current the information contained in this document.

We reserve the right to make improvements to this document and/

or product at any time and without notice.

No part of this document may be reproduced, transmitted,

transcribed, stored in a retrieval system, or any of its part translated

into any language or computer ﬁ le, in any form or by any means

— electronic, mechanical, magnetic, optical, chemical, manual, or

otherwise — without express written permission and consent

Version 1.4 MAR 2014

TRADEMARK ACKNOWLEDGMENTS

All products or service names mentioned in this document may

be trademarks of the companies with which they are associated.

CONTENTS

INTRODUCTION ..............................................................1

FEATURES & SPECIFICATIONS .....................................2

FRONT PANEL .................................................................3

BACK PANEL ....................................................................4

REMOTE CONTROL .......................................................5

REMOTE PROTOCOL COMMANDS ................................6

RS-232 SERIAL INTERFACE ...........................................7

TYPICAL APPLICATION ................................................ 8

IR EXTENDER ................................................................. 9

INTRODUCTION

Congratulations on your purchase of one of the most innovative

VGA(RGBHV)/Stereo Audio(AR/AL) 8:8 matrix switching products

on the market today. The SB-8188CT is a true Matrix Routing

Switcher for VGA(RGBHV)/Stereo Audio(AR/AL) signals. It is

an 8 individual VGA(RGBHV)/Stereo Audio(AR/AL) inputs with

8 individual CAT5 (VGA-RGBHV/Audio) outputs. Because it is a

matrix router, any input may be routed to any output; or the same

input may be routed to all outputs or any combination. It completely

eliminates the need to constantly move around audio and video

input cables and output category(RJ-45) cables. The SB-8188CT

is useful for Matrix signals from VGA source devices (such as:

Personal computer, Set Top Box, and Satellite Receivers, etc.)

To VGA destination devices over CAT5 cables to (Such as LCD

Monitors, VGA Monitors, Plasma LCD TV, VGA Projectors, etc.).

Selection of inputs is made via the front panel push buttons or an

Infrared Remote Control unit or RS-232 control by a computer.

PACKAGE CONTENTS

Check that you have the following components;

• SB-8188CT 8x8 Matrix Switcher

• IR Remote Control

• 19 inch 2D(2U) high Ear mount pair

• RS-232 DRV package

• Users Guide

• AC/DC Adapter: 12VDC, 2A Universal Type 50/60Hz,

100~230 VAC