Instruction manual

PAGE 7SB-5688 INSTRUCTION & OPERATION MANUAL
EDID FUNCTION
EDID function Setup
Press
6.1 Embedded EDID modes Total 8 EDID Modes
Operation will abort if no keys are pressed within 5 seconds.
EDID setup
Step 1 .
Press the EDID button The display will show the currently selected EDID mode
Step 2 . Press SOURCE #1 or #2
button row
The button will flash blue and the display will show
the current Embedded EDID Status.
Step 3 . Press the ENTER button
To set EDID mode.
The switcher will return to operation mode.
Select Embedded EDID :
Mode 1 : FSS
Mode 2 : H24-3D
Mode 3 : H24-3D-M
Mode 4 : H36-3D
Mode 5 : H36-3D-M
Mode 6 : 1280x1024-60Hz
Mode 7 : 1920x1200-60Hz
Mode 8 : AUTO
EDID
>
SOURCE
>
ENTER
Embedded EDID setup
To change the EDID setup
Repeatedly depressing the source 1 button will cycle up thru the options.
Repeatedly depressing the source 2 button will cycle down thru the options.
to select Embedded EDID mode or LEARNING mode.
SOURCE #1
or
SOURCE #2
EDID
2. H24-3D, PCM 2CH
Press EDID button : The LCM will show the current EDID status.