Instruction manual

8x8 HDMI MATRIX SWITCHER
POWER
1 2 3 5 6 7
8
SOURCE
DESTINATION
SOURCE
DESTINATION
4
ALL OF F ENTERRECALLLOCK MEMORYEDID
1 2 3 5 6 7
8
4
IR
1 2
SOURCE STATUS
3 4 5 6 7 8
SB-5688
FRONT PANEL
FRONT PANEL
15121314
PAGE 14 SB-5688 INSTRUCTION & OPERATION MANUAL
FUNCTION KEY - LOCK
- Press and hold LOCK button for two seconds lockout the front panel.
- Press and hold LOCK button for two seconds to enable the front panel.
13
FUNCTION KEY - EDID
14
19 INCH EAR MOUNT PAIR
Converts desktop to 19 inch rack mount. Bracket (part # 1U-440L) INCLUDED.
Image shows rack mount bracket attached.
15
FUNCTION KEY - MEMORY
12
The system will show store presets, up to a total of 16.
Presets are stored in local memory using Source keys 1 thru 8 or Destination keys 1 thru 8
as the memory preset location.
- Configure desired matrices..
- Press button.
- Press 1 thru 8 on either Source or Destination row.
- Press ENTER to ready memory location.
- or press MEMORY again to cancel operation.
Operation completes.
Note : Operation will abort if no keys are pressed within 5 seconds.
MEMORY
OUTPUT 1 2 3 4 5 6 7 8
8 67 5 4 3 2 1
- press EDID to select new EDID mode or select
source row #1 or #2 for LINK source EDID again.
EDID
LEARNING
EDID
3. H24-3D, MULTI AUDIO
- press DESTINATION again, press the same DESTINATION #
to learn CATx EDID,
The EDID for CATx has been learned.
LOCK 1 2 3 4 5 6 7 8
OUTPUT 1 2 3 4 5 6 7 8
MEM ORY
2 2 2 2 2 2 2 2
1 2 3 4 5 6 7 8
S-05
MEMORY
2 2 5 5 8 8 1 1
1 2 3 4 5 6 7 8
SOURCE
D-02