Instruction manual

FRONT PANEL- EDID

FRONT PANEL

12. FUNCTION KEY - EDID (1)

Used to display change current EDID mode.

- Press EDID to select new EDID mode or select

- Press SOURCE row #1 or #2 Select EDID modes.

- Press ENTER to ready memory location.

- Or press EDID again to cancel operation.

Operation completes.

Note : Operation will abort if no keys are pressed within 5 seconds.

FUNCTION KEY - EDID (2)

Select external LEARNING mode

- Press EDID to select new EDID mode or select

- Press Destination again, press the same Destination #1 thru #8 to learn HDBaseT™ out port EDID, The EDID for HDBaseT™

(CATx) has been learned.

- Press ENTER to ready memory location.

- Or press EDID again to cancel operation.

Operation completes.

Note : Operation will abort if no keys are pressed within 5 seconds.