Instruction manual

ManualsBrandsShinybow USA ManualsComputer equipmentSB-5688CK

TABLE OF CONTENTS

SAFETY PRECAUTIONS

Please read all instructions before attempting to unpack, install or

operate this equipment and before connecting the power supply.

Please keep the following in mind as you unpack and install this

equipment:

• Always follow basic safety precautions to reduce the risk of re,

electrical shock and injury to persons.

• To prevent re or shock hazard, do not expose the unit to rain,

moisture or install this product near water.

• Never spill liquid of any kind on or into this product.

• Never push an object of any kind into this product through any

openings or empty slots in the unit, as you may damage parts

inside the unit.

• Do not attach the power supply cabling to building surfaces.

• Use only the supplied power supply unit (PSU). Do not use the

PSU if it is damaged.

• Do not allow anything to rest on the power cabling or allow any

weight to be placed upon it or any person walk on it.

• To protect the unit from overheating, do not block any vents or

openings in the unit housing that provide ventilation and allow

for sufcient space for air to circulate around the unit.

DISCLAIMERS

The information in this manual has been carefully checked and

is believed to be accurate. We assume no responsibility for any

infringements of patents or other rights of third parties which may

result from its use.

We assume no responsibility for any inaccuracies that may be

contained in this document. We make no commitment to update or

to keep current the information contained in this document.

We reserve the right to make improvements to this document and/

or product at any time and without notice.

No part of this document may be reproduced, transmitted,

transcribed, stored in a retrieval system, or any of its part translated

into any language or computer le, in any form or by any means

— electronic, mechanical, magnetic, optical, chemical, manual, or

otherwise — without express written permission and consent

Version 1.0 FEB 2015

TRADEMARK ACKNOWLEDGMENTS

All products or service names mentioned in this document may

be trademarks of the companies with which they are associated.

CONTENTS

INTRODUCTION ...............................................................1

PACKAGE CONTENTS .................................................. 2

FEATURES ....................................................................... 3

SPECIFICATIONS ............................................................ 4

FRONT PANEL ................................................................. 5

FRONT PANEL - EDID ............................................... 6

FRONT PANEL - ALL - OFF - LOCK - ENTER ............... 7

FRONT PANEL - RECALL - MEMORY ........................... 8

REAR PANEL ................................................................... 9

BACK PANEL - HDMI INPUT / OUTPUT ....................... 10

BACK PANEL - HDBaseT™ CONTROLS ..................... 11

BACK PANEL - HDBaseT™ I/O ................................... 12

REMOTE CONTROL ...................................................... 13

EDID FUNCTIONS ......................................................... 17

TYPICAL APPLICATION ............................................... 21

IR EXTENDER ............................................................... 24

ETHERNET SERIAL INTERFACE ................................ 25

RS-232 PROTOCOL .................................................... 26

HDBASET™ APPLICATIONS ....................................... 27

INTRODUCTION

The SB-5688CK is professional 8x8 matrix routing switch.

Supporting (8) HDMI Inputs. Output supported (8) HDMI and

(8) HDBaseT™. The SB-5688CK is based on the HDBaseT™

standard and supports full HDMI Video resolution with embedded

EDID and PoH function (optional), Audio, RS-232, Ethernet and bi-

directional IR, all over a single CATx cable. With a signal bandwidth

of 340Mhz, there is no signal degradation. High Denition Digital

signals can be selected and distributed to any (8) Inputs to (16)

outputs simultaneously (channel outputs mirrored). The Switcher

is certied as being fully CEC and HDCP 1.3 compliant, full HD

4K2K HDMI V1.4a, 3D formats, data rates up to 6.75 Gbps.

Supports UXGA/WUXGA/DVI 1920x1200 resolution to any HD

displays. The SB-5688CK has 1x HDMI for Input, effectively

making this an (8)in by (16) out switcher (same signal on both

HDMI and HDBaseT™ outputs). Using IR remote the switcher’s

HDBaseT™ Extender Transmitter (Tx) allows you to connect a

source in a remote location. Likewise, the HDBaseT™ Output

and our HDBaseT™ Receiver allows you to connect a display

in a remote location. The EDID management can be selected

between (8) different modes. Control is provided via front panel

push buttons, IR remote, RS-232 or TCP/IP (not a web-browser).

An RS-232 Windows GUI interface is provided for matrix routing

control (Windows only).

* The SB-5688CAP optional PoH feature can be ordered separately. This

is considered a special order item and requires approximately a 10 day

lead time.