Instruction manual

ETHERNET SERIAL INTERFACE

ETHERNET SERIAL INTERFACE CONNECT A PC OR CONTROL SYSTEM. VERSION COMPATIBLE V2.0

For a complete list of commands, please reference external document extended Ethernet Protocol Instruction Manual.

ETHERNET SERIAL INTERFACE

Pin Ethernet Reference

1 TXOP TX +

2 TXON TX -

3 RXIP RX +

4 NC

5 NC

6 RXIN RX -

7 NC

8 GND

ETHERNET TCP/IP PROTOCOL COMMANDS ( Ethernet / RS-232 Control driver V2.0 )

*** The Ethernet port and RS-232 port cannot be used simultaneously. Any connection to the Ethernet Control port will disable

serial commands send to the RS-232 port.***

Note :

Control the switcher

SPD : Speed

LINK : Ethernet link

RJ-45 Female 8P-8 Connector