Instruction manual

LEARNING MODE-2
EDID FUNCTION FOR HDMI MATRIX SWITCHER
The MULTIPLE LEARNING MODE-2 feature is part of a rmware update released after JUNE 2014. If you do not see the MULTIPLE
LEARNING MODE-2 feature then you do not have the latest rmware. You should contact your place of purchase for availability of a
rmware update. Not all devices are capable of a rmware update. Firmware update requires a PC with OS Windows XP or WIN7 and
an RS-232 port (or USB to RS-232). Customer is responsible for implementing a rmware update and accepts all risks. Others limitations
may apply.
LEARNING EDID #2 Passing EDID from Destination to Source
Multiple Learning mode #2 EDID setup
Key Press Sequence:
EDID > OFF > DESTINATION #1 thru #8 > ENTER
The EDID for HDMI has been Learned from the Destination port to the Source port.
Press:
EDID button
The LCM will show the current EDID status.
Press:
Off button
The LCM will show the current EDID LEARN status.
Press:
Source button
Press DESTINATION button (#1 ~ #8).
Switcher will LEARNING destination HDMI EDID and pass to the selected
source.Switcher will Enable or Disable HDMI EDID for the selected source.
Press:
Enter button
Press ENTER to conrm changes.
The LCM will return to the default screen selected switch routing status.
NOTE: When the Source has “Learned” the EDID data from a destination, it will save that EDID information into EPROM and the EDID
data will not change. To change a saved HDMI EDID information, you have to select a new LEARNING destination to source or Disable
the LEARNING.
20