Instruction manual

EDID FUNCTION

Learning EDID Single to ALL Learning destination EDID link to All Sources

Step 1. Press EDID button The button will ash blue and the display will show the current Embedded EDID Status.

Step 2. Press destination button (1 thru 8) Learning anyone (1~8) Destination EDID to all sources.

Step 3. Press ALL button Learning selected destination EDID to all sources.

Step 4. Press ENTER button To conrm entries.

EDID status To view the current EDID status

Step 1. Press EDID button The button will ash blue and the display will show the current Embedded EDID Status.

Step 2. Press EDID button To exit.

How to setup FSS Function Fast speed start

Step 1. Press the Destinations #1 ~ 8 button row

Then Press the Source #1~8 button row

To setup and Install all devices.

Step 2. Press EDID button Select a optimum status of Embedded EDID mode.

Step 3. Press ENTER button To conform entries.

Step 4. Press EDID button To select the EDID FSS mode.

Step 5. Press ENTER button To conform entries.

LEARNINGEDIDdenition Learning EDID from Destination to Source

1. Switcher will LEARN destination EDID and pass the selected source.

2. To set up learning between a single destination and single source: Press EDID button > Press Destination (1 thru 8) > Press Source

(1 thru 8) > Press ENTER to conrm. Switcher will learn destination EDID to source device.

3. To set up learning between a single destination and Multiple sources: Press EDID button > Press Destination (1 thru 8) > Press the

majority Sources (1 thru 8) > Press ENTER. Switcher will learn single destination EDID to many source devices.

4. How to Learning single destinations with all sources. Press EDID button > Press ALL button > Press ENTER to conrm.

MULTIPLELEARNING#2denition Multiple Learning EDID from Destination to Source

1. Switcher will multiple LEARN destination EDID and pass the selected source.

2. To set up multiple learning between a single destination and single source:

Press EDID button > Press OFF button > Press Destination (1 thru 8) > Press ENTER to conrm.

Switcher will learn destination EDID to source device.

3. When the Source has “Learned” the EDID data from a destination, it will save that EDID information into EPROM and the EDID data

will not change. To change a saved HDMI EDID information, you have to select a new LEARNING destination to source or Disable the

LEARNING.