Instruction manual
EDID FUNCTION
Mode 6 . 4K2K (24/30Hz) HDMI Support : 4K2K-3D, PCM 2CH (3860x2160-24/30Hz)
Audio Support: PCM 2CH
Mode 7 . 1920x1200-60Hz (DVI-D) DVI Support : DVI-D 1920 x 1200 60Hz
LEARNING EDID Learning EDID from Destination to Source
Learning EDID Setup
Press
EDID > DESTINATION > SOURCE > ENTER
Press EDID > DESTINATION Button: The LCM will be show LEARNING.
Switcher will LEARN destination HDMI EDID and pass the selected source.
Learning EDID setup for HDMI: Key Press Sequence:
EDID > DESTINATION # > SOURCE # > ENTER
The EDID for HDMI has been learned
Press
EDID > DESTINATION > DESTINATION >
SOURCE > ENTER
Switcher will LEARN destination HDBaseT™ CATx EDID and pass the
selected source.
Learning EDID setup for HDBaseT™ CATx: Key Press Sequence:
EDID > DESTINATION # > DESTINATION # > SOURCE # > ENTER
Again, Press the same DESTINATION # to learn HDBaseT™ CATx EDID
The EDID for HDBaseT™ CATx has been learned
NOTE : The already learned EDID cannot be modied. You can only rebuild a new Learning EDID.
For example: When the Source has “Learned” the EDID data from a destination, It will save that EDID information into EPROM and the
EDID data cannot change. Please select new learning destination to sources or change to one of the embedded EDID modes when you
want to remove the learning EDID memory from EPROM.
Learning EDID Single to Single Example : Learn Destination #8 EDID To Source #5.
Step 1. Press EDID button
The button will ash blue and the display will show the current Embedded EDID
Status.
Step 2. Press the Destination #8 button row Copy the Destination #8 Display EDID.
Step 3. Press the Source #5 button row Learning the Destination #8 EDID to Source # 5.
Step 4. Press ENTER button To conrm entries.
Learning EDID Single to Multiple Learning destination EDID link to the majority Sources
Step 1. Press EDID button
The button will ash blue and the display will show the current Embedded EDID
Status.
Step 2. Press the Destinations #1 ~ 8 button row Copy any (1~8) Destinations EDID.
Step 3. Press the Source #1, #6~#8 button row Learning the Destination EDID link to Source #1, #6 ~ #8 .
Step 4. Press ENTER button To conrm entries.
18