Instruction manual

BACK PANEL - HDBaseT™ I/O
BACK PANEL
Category cable lengths via Switcher and HDBaseT™ Receiver
Cable Type
Resolution
Pixel Clock Rate
(MHz)
CAT5e
(70M)
CAT6
(100M)
CAT6a
(100M)
1024x768@60Hz 65.00 MHZ Yes Yes Yes
1280x720p@60Hz 73.84 MHZ Yes Yes Yes
1920x1080i@60Hz 74.25 MHZ NA NA NA
1280x1024@60Hz 108.00 MHZ Yes Yes Yes
1920x1080p@60Hz 148.50 MHZ Yes Yes Yes
1920x1200@60Hz 152.90 MHz Yes Yes Yes
1600x1200@60Hz 162.00 MHZ Yes Yes Yes
BD player : 1080p 174.00 MHz Yes NA Yes
12
15. OUTPUT - 1,2,3,4,5,6,7 & 8 HDBaseT™ (Transmitter):
To send (8) HDMI and control signals via Switcher (8) HDBaseT™
Transmitters to link (8) external HDBaseT™ Receiver.
Switcher used (8) HDBaseT™ Transmitter Output #1 ~ Output #8
with optional PoH (via the SB-5688CAP) RJ-45 via CATx(6/6a/7)
category cable. Controls signals RS-232, Ethernet, IR input, IR
output and optional PoH (via the SB-5688CAP) between Switcher
and Receiver.
HDBaseT™ Transmitter Connector: (8) RJ-45 Jack
8P8C Female socket.
Link LED :
solid = valid link
Flash = attempting to link
Off = no link established