Instruction manual

BACK PANEL - HDBaseT™ CONTROLS
BACK PANEL
11
9. HDBaseT™ RS-232 - 1,2,3,4,5,6,7 & 8 CONNECTION:
(8) RS-232 control port to allow for interfacing to a PC. Controls
I/O via Switcher HDBaseT™ Transmitter (8) Rooms each via this
Terminal Block-3pin Female socket for serial RS-232 control.
10. HDBaseT™ LAN CONNECTION:
All Tx LAN: Provides Ethernet (LAN) connection from the
switcher to All HDBaseT™ Transmitter (ie. SB-6320T).
11. HDBaseT™ IR INPUT - 1,2,3,4,5,6,7 & 8 REMOTE IR
SIGNAL TO ROOM:
Send (8) IR signals to (8) rooms via Switcher HDBaseT™
Transmitter. When you plug the Switcher HDBaseT™ IR
Transmitter into the external port, the room IR HDBaseT™ receiver
remains active.
12. HDBaseT™ IR OUTPUT - 1,2,3,4,5,6,7 & 8 REMOTE IR
SIGNAL FROM ROOM:
Receive (8) IR signals from (8) rooms each via HDBaseT™
Transmitter. When you plug the Switcher HDBaseT™ IR
Transmitter into the external port, the room IR HDBaseT™ receiver
remains active.
13. HDBaseT™ ALL IN : 1,2,3,4,5,6,7 & 8 REMOTE IR SIGNAL
TO ROOM:
Send IR signal to room via Switcher HDBaseT™ Transmitter.
When you plug the Switcher HDBaseT™ IR Transmitter into the
external port, the room IR HDBaseT™ receiver remains active.
14. HDBaseT™ ALL OUT : - 1,2,3,4,5,6,7 & 8 REMOTE IR
SIGNAL FROM ROOM:
Receive IR signal from room via Switcher HDBaseT™ Transmitter.
When you plug the Switcher HDBaseT™ IR Transmitter into the
external port, the room IR HDBaseT™ receiver remains active.
Remote Port : Terminal Block-3pin Female socket
ALL HDBaseT™ Tx LAN Port Connector:
HDBaseT™ Phone-Jack 8P8C, RJ-45 Female socket.
LAN Controls: Note: from switcher to HDBaseT™
Transmitter.
IR Extender Jack: Female Jack - inner OD Ø 3.5 mm
IR Extender Jack: Female Jack - inner OD Ø 3.5 mm
IR Extender Jack: Female Jack - inner OD Ø 3.5 mm
IR Extender Jack: Female Jack - inner OD Ø 3.5 mm