Instruction manual

FRONT PANEL - RECALL - MEMORY
FRONT PANEL
17. FUNCTION KEY - RECALL
The system will show previously stored presets, up to a total of (16). Presets are stored in local memory using Source keys (1 thru 8) or
Destination keys (1 thru 8) as the memory preset location.
- Press RECALL button.
- Press (1 thru 8) on either Source or Destination row.
- Press ENTER The pre-set conguration will execute.
Operation completes.
Note: Operation will abort if no keys are pressed within 5 seconds.
- Or press RECALL again to cancel operation.
18. FUNCTION KEY - MEMORY
The system will show store presets, up to a total of (16). Presets are stored in local memory using Source keys (1 thru 8) or Destination
keys (1 thru 8) as the memory preset location.
- Congure desired matrices.
- Press MEMORY button.
- Press (1 thru 8) on either Source or Destination row.
- Press ENTER to ready memory location.
- Or press MEMORY again to cancel operation.
Operation completes.
Note : Operation will abort if no keys are pressed within 5 seconds.
- Or press MEMORY again to cancel operation.
8