M U LT IM ED IA AUDIO A ND V IS UA L INSTRUCTION MANUAL MODEL : SB-5688CK 8x8 HDMI-HDBaseT™ Matrix Switcher 8x8 HDMI Over HDBaseT™ Matrix Switch with Single CATx HDMI over HDBaseT™ Matrix Switcher Series Thank you for purchasing the SB-5688CK HDMI-HDBaseT™ Matrix Switcher. You will find this unit easy to install and highly reliable but it is essential that you read this manual thoroughly before attempting to use 8x8 HDMIHDBaseT™ Matrix switcher.
SAFETY INFORMATION 1. To ensure the best results from this product, please read this manual and all other documentation before operating your equipment. Retain all documentation for future reference. 2. Follow all instructions printed on unit chassis for proper operation. 3. To reduce the risk of fire, do not spill water or other liquids into or on the unit, or operate the unit while standing in liquid. 4. Make sure power outlets conform to the power requirements listed on the back of the unit.
TABLE OF CONTENTS CONTENTS SAFETY PRECAUTIONS INTRODUCTION ...............................................................1 Please read all instructions before attempting to unpack, install or operate this equipment and before connecting the power supply. Please keep the following in mind as you unpack and install this equipment: • Always follow basic safety precautions to reduce the risk of fire, electrical shock and injury to persons.
PACKAGE CONTENTS PACKAGE CONTENTS Check that you have the following components; • SB-5688CK Matrix Switcher • RS-232 V2.0 Protocol Instructions • Ethernet V2.0 Protocol Instructions • Master wireless IR Remote Control (SW-HD88CK) • (8) each; Individual wireless IR Control (SW-HD88CK-IR01~IR08) • 19 inch Ear mount bracket (Part # 2U-440L) • SB-101 IR Extender distance ~982 feet (300M) Transmitter set • SB-100 IR Extender distance ~982 feet (300M) Receiver set • CD Contents: This manual, Windows GUI, ISP V1.
FEATURES FEATURES Based on HDBaseT™, bi-directional IR, RS-232, Multi Format Audio, Ethernet and PoH (Optional via the SB-5688CAP). Full Resolution HD Video, all HDBaseT™ signals over single CATx cable.
SPECIFICATIONS SPECIFICATIONS • Type of HDMI Switcher: (8) Inputs to (8) Outputs HDMI over HDBaseT™ Matrix Switch with Single CATx • HDMI Support: HDMI 4K2K, 1080p-@60Hz, H36-bit Deep color, 3D of HDMI V1.4 formats • HDBaseT™ Support: Bi-directional IR, RS-232, Multi Format Audio, Ethernet and optional PoH (via the SB-5688CAP), over one CATx cable. • HDCP/CEC Support: HDCP 2.2 Compliant, CEC Compliant • Video Bandwidth: Double Data Rates: 340 MHz, Total 6.
FRONT PANEL FRONT PANEL 1. POWER ON SWITCH The power switch turns the unit on and off. The LCM will illuminate blue to indicate the switcher is ON and receiving power. The switcher will remember the last setting during a power cycle. When power is removed and resorted, the last configuration will be evoked. 2. STATUS DISPLAY Front panel status display shows current matrix routing configuration. This same display also shows particular configuration settings depending on your current function.
FRONT PANEL- EDID FRONT PANEL 12. FUNCTION KEY - EDID (1) Used to display change current EDID mode. - Press EDID to select new EDID mode or select - Press SOURCE row #1 or #2 Select EDID modes. - Press ENTER to ready memory location. - Or press EDID again to cancel operation. Operation completes. Note : Operation will abort if no keys are pressed within 5 seconds.
FRONT PANEL - ALL - OFF - LOCK - ENTER FRONT PANEL 13. FUNCTION KEY - ALL Disables (mute) video on all destinations OR assign the same source to all destinations. Option 1 - Press ALL followed by OFF button. The display will show ”0” to indicate none of the destinations are assigned a video source. Option 2 - Press ALL followed by Source (1 thru 8). The display will show the Source selected. - Press ENTER The pre-set source selection will be assigned all destinations. 14.
FRONT PANEL - RECALL - MEMORY FRONT PANEL 17. FUNCTION KEY - RECALL The system will show previously stored presets, up to a total of (16). Presets are stored in local memory using Source keys (1 thru 8) or Destination keys (1 thru 8) as the memory preset location. - Press RECALL button. - Press (1 thru 8) on either Source or Destination row. - Press ENTER The pre-set configuration will execute. Operation completes. Note: Operation will abort if no keys are pressed within 5 seconds.
BACK PANEL BACK PANEL 1. DC POWER INLET: The Switcher is fitted with a AC power plug input connector. Ensure that the used is of an approved type and is of sufficient current carrying connector capacity with the correct voltage and connector polarity. 100~240Volt AC, 50/60Hz power supply. Power Socket : Connector Type : IEC 60320 C13 2. IR EXTENDER CONTROL: Support one of IR Extender. Extend distance maximum 300M/ ~984 feet.
BACK PANEL - HDMI Input / Output BACK PANEL HDMI Connector: HDMI Type A SMD 19pin Female socket connector. Note: With the proper adapters, the switcher can be used with DVI digital video signals HDCP compliant. The DVI support Audio input. 5. INPUTS- 1,2,3,4,5,6,7, & 8 HDMI: Connect an HDMI signal source to this Input. This HDMI port supports HDMI with embedded audio and DVI with AUX audio sources.
BACK PANEL - HDBaseT™ Controls BACK PANEL 9. HDBaseT™ RS-232 - 1,2,3,4,5,6,7 & 8 CONNECTION: (8) RS-232 control port to allow for interfacing to a PC. Controls I/O via Switcher HDBaseT™ Transmitter (8) Rooms each via this Terminal Block-3pin Female socket for serial RS-232 control. Remote Port : Terminal Block-3pin Female socket 10. HDBaseT™ LAN CONNECTION: All Tx LAN: Provides Ethernet (LAN) connection from the switcher to All HDBaseT™ Transmitter (ie. SB-6320T).
BACK PANEL - HDBaseT™ I/O BACK PANEL HDBaseT™ Transmitter Connector: (8) RJ-45 Jack 8P8C Female socket. 15. OUTPUT - 1,2,3,4,5,6,7 & 8 HDBaseT™ (Transmitter): To send (8) HDMI and control signals via Switcher (8) HDBaseT™ Transmitters to link (8) external HDBaseT™ Receiver. Switcher used (8) HDBaseT™ Transmitter Output #1 ~ Output #8 with optional PoH (via the SB-5688CAP) RJ-45 via CATx(6/6a/7) category cable.
REMOTE CONTROL Before making any connections to the switcher, observe the following: • Ensure the mains voltage supply matches the label on the supplied plug- Pack (+/- 10%). • Ensure that the power switch is OFF. • Ensure that all system grounds (earth) are connected to a common point. • Avoid powering equipment within a system from multiple power sources that may be separated by large distances. • Connect all audio video sources and destination equipment.
REMOTE PROTOCOL COMMANDS IR REMOTE CUSTOM AND DATA CODES (NEC Standard) HOW TO SETUP IR CODES : CUSTOM CODE : 09F6 POWER ON : 09F6 A15E MEMORY : 09F6 B44B POWER OFF : 09F6 A25D LOCK : 09F6 B54A ALL : 09F6 B04F EDID : 09F6 B748 OFF : 09F6 B14E ENTER : 09F6 B34C RECALL : 09F6 B24D PRESS DESTINATION - # then PRESS SOURCE - # DESTINATION #1 : 09F6 DESTINATION #2 : 09F6 DESTINATION #3 : 09F6 DESTINATION #4 : 09F6 DESTINATION #5 : 09F6 DESTINATION #6 : 09F6 DESTINATION #7 : 09F6 DESTINATI
REMOTE CONTROL ROOM REMOTE CONTROL #1 ~ #8 CUSTOM CODE AND DATA CODES IR CUSTOM AND DATA CODES (NEC Standard) PRESS Number To Select SOURCE CUSTOM CODE : 09F6 IR-01 DATA CODE: SOURCE #1 : 09F6 11EE SOURCE #2 : 09F6 12ED SOURCE #3 : 09F6 13EC SOURCE #4 : 09F6 14EB SOURCE #5 : 09F6 15EA SOURCE #6 : 09F6 16E9 SOURCE #7 : 09F6 17E8 SOURCE #8 : 09F6 18E7 IR-02 DATA CODE: SOURCE #1 : 09F6 SOURCE #2 : 09F6 SOURCE #3 : 09F6 SOURCE #4 : 09F6 SOURCE #5 : 09F6 SOURCE #6 :
REMOTE CONTROL ROOM REMOTE CONTROL #1 ~ #8 CUSTOM CODE AND DATA CODES IR CUSTOM AND DATA CODES (NEC Standard) PRESS Number To Select SOURCE CUSTOM CODE : 09F6 IR-05 DATA CODE: SOURCE #1 : 09F6 51AE SOURCE #2 : 09F6 52AD SOURCE #3 : 09F6 53AC SOURCE #4 : 09F6 54AB SOURCE #5 : 09F6 55AA SOURCE #6 : 09F6 56A9 SOURCE #7 : 09F6 57A8 SOURCE #8 : 09F6 58A7 IR-06 DATA CODE: SOURCE #1 : 09F6 SOURCE #2 : 09F6 SOURCE #3 : 09F6 SOURCE #4 : 09F6 SOURCE #5 : 09F6 SOURCE #6 :
EDID FUNCTION EDID function for HDMI Matrix Switcher EDID Setup To Change the EDID Setup Step 1. Press the EDID button The display will show the currently selected EDID mode Step 2. Press SOURCE #1 or #2 button row The button will flash blue and the display will show the current Embedded EDID Status. Step 3. Press the ENTER button To set EDID mode. The switcher will return to operation mode. Operation will abort if no keys are pressed within 5 seconds.
EDID FUNCTION Mode 6 . 4K2K (24/30Hz) HDMI Support : 4K2K-3D, PCM 2CH (3860x2160-24/30Hz) Audio Support: PCM 2CH Mode 7 . 1920x1200-60Hz (DVI-D) DVI Support : DVI-D 1920 x 1200 60Hz LEARNING EDID Learning EDID from Destination to Source Learning EDID Setup Press Press EDID > DESTINATION Button: The LCM will be show LEARNING. Switcher will LEARN destination HDMI EDID and pass the selected source.
EDID FUNCTION Learning EDID Single to ALL Learning destination EDID link to All Sources Step 1. Press EDID button The button will flash blue and the display will show the current Embedded EDID Status. Step 2. Press destination button (1 thru 8) Learning anyone (1~8) Destination EDID to all sources. Step 3. Press ALL button Learning selected destination EDID to all sources. Step 4. Press ENTER button To confirm entries. EDID status To view the current EDID status Step 1.
LEARNING MODE-2 EDID Function for HDMI Matrix Switcher The MULTIPLE LEARNING MODE-2 feature is part of a firmware update released after JUNE 2014. If you do not see the MULTIPLE LEARNING MODE-2 feature then you do not have the latest firmware. You should contact your place of purchase for availability of a firmware update. Not all devices are capable of a firmware update. Firmware update requires a PC with OS Windows XP or WIN7 and an RS-232 port (or USB to RS-232).
TYPICAL APPLICATION INSTALLING DIAGRAM Samples connection: Using IR External, RS-232 or Ethernet command to control Switcher SB-5688CK via PC or SB-100 IR receiver transmit the SB-5688CK’s IR signal. NOTE: 1. Switcher IR External port : Use SB-100 IR signal Receiver. 2. Control Switch via a PC RS232. 3. Control Switch via a PC Ethernet. Application RS-232, IR and Ethernet control the Switcher.
TYPICAL APPLICATION INSTALLING DIAGRAM Samples connection: using SB-5688CK HDBaseT™ Transmitter and one HDBaseT™ Receiver (SB-6335R) to control a projector via RS-232 or IR signals. NOTE: 1. IR Control Projector Over HDBaseT™ Extender: SB-5688CK HDBaseT™ Transmitter Application HDBaseT™ Receiver : - SB-6333R, SB-6333R3 - SB-6335R, SB-6335R4, SB-6335R5 - SB-6320R, SB-6320R4, SB-6320R5 2. Projector RS-232 Control by a PC via HDBaseT™ Extender. 3. Projector IR control via HDBaseT™Extender IR in/out. 4.
TYPICAL APPLICATION INSTALLING DIAGRAM Samples connection: Using SB-5688CK with IR Transmitters (SB-101) via HDBaseT™ Receiver (SB-6335R) to control a IR signal from Satellite Receiver. NOTE: 1. IR Control Satellite Receiver Over HDBaseT™ Extender via CATx (6/6a/7) cable: HDBaseT™ Transmitter : SB-5688CK Application HDBaseT™ Receiver : - SB-6333R, SB-6333R3 - SB-6335R, SB-6335R4, SB-6335R5 - SB-6320R, SB-6320R4, SB-6320R5 2.
IR EXTENDER 1. SB-100 IR 300M Receiver Switcher IR EXT. In Cable (3C) Distance: Max.300M IR Receiver (SB-100) IR PN#: SW-5669 R oHS /95/E C IR E XT. in RS - 232 IR EXT .
IR EXTENDER IR EMITTER: 1. SB-101 IR 300M Transmitter DC 12V Device Cable (3C) IR out IR in CAT6/6a/7 From Receiver To Receiver OUTPUT IR Transmitter (SB-101) R oHS /95/E C IR Tx SB-101 SB-101 IR Transmitter Set 2.
ETHERNET SERIAL INTERFACE ETHERNET SERIAL INTERFACE CONNECT a PC or CONTROL SYSTEM. VERSION COMPATIBLE V2.0 For a complete list of commands, please reference external document extended Ethernet Protocol Instruction Manual.
RS-232 SERIAL INTERFACE RS-232 SERIAL INTERFACE CONNECT a PC or CONTROL SYSTEM. VERSION COMPATIBLE V2.0 For a complete list of commands, please reference external document extended RS-232 Protocol Instruction Manual.
HDBASET™ APPLICATION - TRANSMITTER & RECEIVER APPLICATION HDBaseT™ Matrix Switcher using HDBaseT™ Receiver (Sold separately). HDBaseT™ Receiver: SB-6333R Distance:Max.100M INPUTS: • 1x HDBaseT™ in • 1x IR in (Send IR signal to SB-5688CK TX) OUTPUTS: • 1x HDMI out • 1x HDMI • 1X IR out (IR signal from SB-5688CK Transmitter) Controls: • 1x RS-232, 1x IR in, 1x IR out HDBaseT™ Receiver: SB-6335R Distance:Max.
HDBASET™ APPLICATION RACKMOUNT (optional) SB-6075A: SB-6335T/R 19 INCH 1RU-1UNIT RACK MOUNT Model No.: #1U-1p-L440-44MM SB-6075B: SB-6335T/R 19 INCH 1RU-2UNIT RACK MOUNT Model No.: #1U-2p-L440-44MM SB-6069: SB-6335T/R 19 INCH 4U-10P RACK MOUNT Model No.: #4U-10p-L130MM SB-6335T/R 4U Ear mount pairs Parts No.
HDBASET™ APPLICATION APPLICATION Optional 19 inch Rack Mount Bracket for SB-6335T and/or SB-6335R: Complete 19 inch 4U rack mount of SB-6069 Install Application: SB-6335T/R SB-6069 (optional) SB-6335T/R 19 INCH 4U-10P RACK MOUNT Model No.: #4U-10p-M130MM SB-6335T/R 4U Ear mount pairs Parts No.: MEER6069ER13000 Model No.: #4U-10p-M130MM-COV SB-6335T/R 4U Ear mount pairs Parts No.: MEER6069ER11000 SB-6335T/R 19 INCH 4U-10P RACK MOUNT Model No.: #WM-1INCH-130MM SB-6335T/R 4U Ear mount pairs Parts No.
LIMITED WARRANTY PLEASE READ THE FOLLOWING TERMS AND CONDITIONS CAREFULLY BEFORE USING THIS HARDWARE, COMPONENTS AND SOFTWARE PROVIDED BY, THROUGH OR UNDER SHINYBOWUSA, INC (COLLECTIVELY, THE “PRODUCT”). By using installing or using the Product, you unconditionally signify your agreement to these Terms and Conditions. If you do not agree to these Terms and Conditions, do not use the Product and return the Product to SHINYBOWUSA, Inc.
M U LT IM ED IA AUDIO A ND V IS UA L 122 Rose Ln. Suite 303 | Frisco, Texas 75034 1-877-SHINY-USA 1-877-744-6987 1-972-377-2508 sales@shinybowusa.com www.shinybowusa.
