Instruction manual

EDID function Setup

Press

PAGE 7SB-5645 INSTRUCTION & OPERATION MANUAL

EDID FUNCTION

6.1 Embedded EDID modes Total 8 EDID Modes

Operation will abort if no keys are pressed within 5 seconds.

EDID setup

Step 1 .

Press the EDID button The display will show the currently selected EDID mode

Step 2 . Press SOURCE #1 or #2

button row

The button will flash blue and the display will show

the current Embedded EDID Status.

Step 3 . Press the ENTER button

To set EDID mode.

The switcher will return to operation mode.

Embadded EDID :

Mode 1 : FSS

Mode 2 : H24-3D

Mode 3 : H24M-3D

Mode 4 : H36

Mode 5 : H36M

Mode 6 : H36-3D

Mode 7 : H36M-3D

Mode 8 : AUTO

EDID

SOURCE

ENTER

Embedded EDID setup

To change the EDID setup

Repeatedly depressing the source 1 button will cycle up thru the options.

Repeatedly depressing the source 2 button will cycle down thru the options.

to select EDID mode.

SOURCE #1

SOURCE #2