Instruction manual

PAGE 18 SB-5645 INSTRUCTION & OPERATION MANUAL
Before making any connections to the switcher. Observe the following:
> Ensure the mains voltage supply matches the label on the supplied plug-
Pack (+/- 10%)
> Ensure that the power switch is OFF
> Ensure that all system grounds (earth) are connected to a common point.
> Avoid powering equipment within a system from multiple power sources
that may be separated by large distances
REMOTE CONTROL
REMOTE CONTROL
> Connect all audio video sources and destination equipment
> power up all source and destination audio-visual sources
> For each destination output select the appropriate input source by using
> Upon power up the switcher will return to its last used setting before
The front panel input 1~8 select buttons. The supplied IR remote control.
Or through the RS 232 serial communications port.
Powered down.
SWITCH POWER ON or OFF
1
Controller with a separate power ON and OFF
DESTINATION : 1 thru 4 OUTPUT SELECTION
Press the destination button to select the output
display channel.
2
3
FUNCTION KEY
ALL - function selection button
5
SOURCE : 1 thru 4 INPUT SOURCE SELECTION
Press input 1~4 sources with selection button
4
DEMO or ENTER - function selection button
EDID - function selection button
LOCK - function selection button
3
4
5
2
1
IR REMOTE : SW-5645
IR REMOTE CONTROL KEY :
6
SELECT EDID MODES : press source button 1 thru 2.
6
1 Mode 1 : FSS (Fast Speed Start)
2 Mode 2 : H24-3D
3 Mode 3 : H24M-3D
4 Mode 4 : H36
5 Mode 5 : H36M
6 Mode 6 : H36-3D
7 Mode 7 : H36M-3D
8 Mode 8 : AUTO
POWER
1
SW-5645
2 3 4
ON OFF
A15E
A25D
MEMORY
ENIRPA5645000A2
RECALL
1 2 3 4
ENTER
LOCK
EDID
ALL OFF
20DF10EF 40BF 30CF
02FD 01FE 04FB 03FC
SOURCE
DESTINATION
4x4 HDMI MATRIX SWITCHER
B04F
B34C
B44B
B14E
B24DB54A
B748