Instruction manual

PAGE 15SB-5645 INSTRUCTION & OPERATION MANUAL
1
REAR PANEL
REAR PANEL
23
1
3
2
INPUTS- 1,2,3, & 4 HDMI
4
HDMI Digital Video/Audio, Connector with fix screw
Input 1 ~ Input 4
RS 232 CONNECTION
RS 232 control port to allow for interfacing to a PC
a computer or touch panel control, to the switcher via this
DB-9pin Female connector for serial RS-232 control.
, Such as
IR EXTENDER CONTROL
DC POWER INLET
The Switcher is fitted with a DC power plug input connector.
Ensure that the used is of an approved type and is of sufficient
current carrying connector capacity with the correct voltage and
connector polarity. 12Volt DC power supply 3A Max (Center pin positive).
Support one of IR Extender
Extend distance maximum 300Meters / ~1000 feet
When you plug the External IR extender into the switcher,
the front panel IR receiver remain active.
4
OUTPUTS- 1,2,3,& 4 HDMI
5
HDMI Digital Video/Audio, Connector with fix screw
Output 1 ~ Output 4
Remote port :
DB-9pin Female connector
HDMI digital video/audio connector:
HDMI Female connector.
Connect a signal link of HDMI direct digital video/audio to
this Female HDMI connector. This connector supports HDMI
digital video/audio and DVI digital video sources.
Note:
With the proper adapters, the switcher
can be used with DVI digital video signals
HDCP compliant. DVI does not support audio.
Connect a signal link of HDMI direct digital video/audio to
this Female HDMI connector. This connector supports HDMI
digital video/audio and DVI digital video sources.
HDMI digital video/audio connector:
HDMI Female connector.
Note:
With the proper adapters, the switcher
can be used with DVI digital video signals
HDCP compliant.
Power Jack:
DC Jack - inner OD O 2.1mm (+ )
Outside OD O 5.5mm (GND)
Power input - 12VDC, 3A
IR Extender Jack:
Female Jack - inner OD O 3.5 mm
INPUT
IR EXT.
DC 12V
RoHS/9 5/EC
RS232
RoHS
OUTPUT
4
OUTPUT
3
OUTPUT
2
OUTPUT
1
INPUT
4
INPUT
3
INPUT
2
INPUT
1
4x4 HDM I MATR IX SWITCH ER
6