Instruction manual

FRONT PANEL
FRONT PANEL
15121314
PAGE 14
SB-5645 INSTRUCTION & OPERATION MANUAL
4x4 HDMI MATRIX SWITCHER
POWER
1 2 3
SOURCE
DESTINATION
SOURCE
DESTINATION
4
ALL OFF ENTERRECALLLOCK MEMORYEDID
1 2 3 4
IR
1 2
SOURCE STATUS
3 4
SB-5645
OUTPUT : 1 2 3 4
INPUT : 2 4 1 3
FUNCTION KEY - LOCK
- Press and hold LOCK button for two seconds lockout the front panel.
- Press and hold LOCK button for two seconds to enable the front panel.
13
FUNCTION KEY - EDID
- press EDID to select new EDID mode or select source row #1 or #2 for LINK source EDID again.
14
19 INCH EAR MOUNT PAIR
Converts desktop to 19 inch rack mount. Bracket (part # 1U-440L) INCLUDED.
Image shows rack mount bracket attached.
15
FUNCTION KEY - MEMORY
12
The system will show store presets, up to a total of 8.
Presets are stored in local memory using Source keys 1 thru 4 or Destination keys 1 thru 4
as the memory preset location.
- Configure desired matrices..
- Press button.
- Press 1 thru 4 on either Source or Destination row.
- Press ENTER to ready memory location.
- or press MEMORY again to cancel operation.
Operation completes.
Note : Operation will abort if no keys are pressed within 5 seconds.
MEMORY