User Manual

ManualsBrandsShintom ManualsElectronicsPCS handset

Deleting Stored Numbers (MENU 2-4)

You can delete the current numbers dialled, received, and missed in

the Recent Calls list at any time.

Press / to select Yes, and press .

“Please wait” will be displayed and your phone will return to

standby mode.

To cancel deleting, select No, and press .

Call Timer Review (MENU 2-5)

You can show the time for the last call or all calls in standby mode.

The time for last call/all calls will be displayed in minutes.

Select one of the following items, and press .

Last Call (MENU 2-5-1), All Calls (MENU 2-5-2)

Call Cost Review (MENU 2-6)

You can show the cost of the current call during a call, if your

network service provider supports the feature.

Select one of the following items, and press .

Last Call (MENU 2-6-1), All Calls (MENU 2-6-2)

• To clear the log for Last call/All Calls:

1) Select Clear logs (MENU 2-6-3), and press .

“Enter PIN2” will be displayed.

2) Enter your PIN2 code, and press . Then, all the data of

the cost will be cleared.

7. Recent Calls Menu Operation

CEL GDU325 (p.29-40) Eng.pm6 8/2/01, 10:17 AM31

Summary of content (6 pages)

PAGE 1
7. Recent Calls Menu Operation Deleting Stored Numbers (MENU 2-4) You can delete the current numbers dialled, received, and missed in the Recent Calls list at any time. Press / to select Yes, and press . “Please wait” will be displayed and your phone will return to standby mode. To cancel deleting, select No, and press . Call Timer Review (MENU 2-5) You can show the time for the last call or all calls in standby mode. The time for last call/all calls will be displayed in minutes.
PAGE 2
7. Recent Calls Menu Operation Cost Unit Reading/Setting (MENU 2-6-4) • To review the current cost per call unit setting: 1) Select Read units, and press . Price/unit will be displayed with the three-letter description that shows the currency. • To set the cost per call unit: 1) Select Set units, and press . “Enter PIN2” will be displayed. 2) Enter your PIN2 code, and press . 3) Enter the cost per call unit, and press . Use the key to enter a decimal point.
PAGE 3
8. Messages 8. Messages (MENU 3) This feature operation may be offered by your mobile service provider. Before using this feature, you must subscribe to them through your home mobile service provider. Please contact your mobile service provider for more information. Press MENU and Message, and press . See page 21 for general information on the menu functions. NOTE: - These optional network services may not be available in all areas.
PAGE 4
8. Messages 5 Select Save or Send (save then send edited message or send message without saving). Deleting Incoming Messages (MENU3-1 / ) Deletes messages that have been received. 1 Select the message to delete with 2 Press / and press and selected Delete then press 3 Select either Yes or No and press . again. . NOTE: - To delete all received messages, select Delete all from the bottom of the message list.
PAGE 5
8. Messages 1 Press while the message is being displayed. 2 Select Voice call and press the message. to dial the number to the sender of Extracting Numbers from Incoming Messages (MENU3-1 / ) Phone numbers can be extracted from incoming messages and a call can be made to the number. 1 Press while a messaging containing a phone number is being displayed. 2 Select Extract nos. and press Pressing to extract the phone number. twice will dial the number that has been extracted.
PAGE 6
8. Messages Using T9 Predictive Text Input T9 predictive text entry is available in some areas of your phone that require text entry, as opposed to numbers only. It comprises several main modes: In the Message create screen (e,g, MENU, 3, 3), press MENU, then select the desired mode as follows; *2 Switched to the next mode each time the key is pressed. *1 Press MENU, use / to select the mode and press to switch. : Capital letters : Only the initial letter is capitalized.