Wireless Vibro Speaker User Manual
Contents 1. Introduction.................................................................. 1 2. Battery Precautions...................................................... 2 3. Getting Started............................................................. 3 4. Installation.................................................................... 4 5. Cable Connections....................................................... 5 6. Bluetooth Connection................................................... 6 7.
2. Battery Precautions The device can be powered by a built-in, rechargeable lithium battery. Please charge the battery for at least 8 hours before your first use of the device. • • • • • • • • If the device is not used for a long period of time, the battery may lose its charge. Please recharge the battery Rechargeable batteries are only to be charged under adult supervision Use only the supplied USB cable to recharge the battery.
3.
Package Contents Portable Vibro Speaker USB Cable Wall Mount Adaptor Manual 4. Installation Rubber Stand Remove the protective tape at the bottom of the device to reveal the rubber stand. Note: 1. Don’t throw away the protective tape, please stick it on when using a mounting socket or when not in use. 2. Use a wet finger to clean any dust off the pad.
5. Cable Connections Power & Audio Input Combo Cable for audio input from computer for power for audio input from portable device USB connection is required to power and charge the device 6. Bluetooth Connection Slide the switch to “BT”, you will see a burst of flashes on the LED pairing it with your phone. Put the speaker in pairing mode When you turn on the bluetooth, the speaker will be discovered by your phone. 1.
2. Set your Bluetooth phone to “discover” the speaker Follow your phone’s instruction guide, first make sure that Bluetooth is activated on your mobile phone. Then set your phone to discover the speaker. This usually involves going to “setup”, “connect” or “Bluetooth” menu on your mobile phone and selecting the option to “discover” or “add” a Bluetooth device. 3. Your phone will find the speaker Your phone will find the speaker under name “Bluetooth”.
Make a call When you make a call from your mobile phone the call will (subject to phone settings) automatically transfer to this speaker. The inbuilt microphone will also activate, enabling you to speak directly into the Vibro Speaker. -> Answer / Reject / End a Call..........press ►|| to answer a call, ►|| again to reject a call. After calling, press ►|| to end the call. This device can also be used for web conferencing and Skype. 9. Battery Charging The device has a built-in rechargeable lithium battery.
To avoid damage to your device, please: • • • • • • • Do not drop, crush, bend, or apply excessive force to the device Do not expose your device to moisture, extreme or prolonged heat, cold, humidity, or other adverse conditions. Avoid storing in a damp, humid or wet place. It is not waterproof Do not operate or store unit in places with frequent static electricity or electrical noise (eg. speaker, TV set). Clean the unit with a soft cloth or a damp chamois leather. Never use solvents.
Notes ......................................................................................... ......................................................................................... ......................................................................................... ......................................................................................... ......................................................................................... ........................................................
