User manual

8
Weather forecast module installation
Insert the jack of indoor sensor into the “Weather station” jack on photo 1.
frame. Make sure the indoor sensor is as far away as possible from the
photo frame to avoid heat interference.
Put outdoor sensor in a sheltered and shaded position so as to protect 2.
it from direct exposure to sun and rain. The outdoor sensor has to be
put upright in right direction, not horizontal. (Note: Please install batteries
inside the outdoor sensor before usage, when leaving the outdoor sensor
unused for a long period of time, please take out the batteries)
Quick Start
Step 1 Insert the jack of the DC adapter into the digital photo frame, then plug
the DC adapter into a standard power outlet.
Step 2 Turn on the power, the pictures from the inserted memory card or
internal memory will be displayed automatically.
Mode Selection Memory Card Weather Forecast Settings
(Picture, video, selection Clock/Calendar/
music, combo) Alarm