Instruction manual

9
3.2 External dimensions and Panel cutout (Scale: mm)
(Fig. 3.2-1)
Lateral close mounting
n: Number of units mounted
If lateral close mounting is used for the controller,
(Fig. 3.2-2) IP66 specification (Drip-proof/Dust-proof) may be
compromised, and all warranties will be invalidated.
3.3 Mounting
Mountable panel thickness is 1 to 8mm.
Insert the PCD-33A from the front of the control panel.
Slot the mounting bracket to the holes at the top and bottom of the case,
and screw in place.
Notice
As the case is made of resin, do not use excessive force while screwing in the mounting
bracket. The torque should be 0.12N•m.
(Fig. 3.3-1)
130
nX96-3
＋ 0.5
0
92
＋0.8
0
92
＋0.8
0
96
91
106.2
11.5 98.5
104.5 (for TC option)