Instruction manual

Alarm output action: One alarm can be selected by the front keypad from 9 types

of alarm and no alarm action: High limit alarm, Low limit

alarm, High/Low limits alarm, High/Low limit range alarm,

Process high alarm and Process low alarm, High limit alarm

with the standby function, Low limit alarm with the standby

function, High/Low limits alarm with the standby function

and No alarm action.

Default: No alarm action for Alarm 1(A1) and Alarm 2(A2)

Event output

One of the outputs can be selected by the front keypad from a choice of:

Time signal output, Pattern end output and Run (program control run) output.

Default value: Time signal output

Output: Relay contact 1a

Control capacity: 3A 250V AC (resistive load)

1A 250V AC (inductive load cos =0.4)

Electric life: 100,000 cycles

Time signal output:

Sets the amount of time for time signal output ON time and time signal output OFF

time within one pattern time. Time signal output is turned on during time signal output

ON time. Time signal output ON time follows time signal output OFF time.

Setting range: OFF time, 00.00 to 99.59 (Hour:Minute or Minute:Second)

ON time, 00.00 to 99.59 (Hour:Minute or Minute:Second)

The time unit can be selected from the Step time unit selection.

Default value: 00.00 (Hour:Minute)

Pattern end output:

After program control is complete, pattern end output is turned on during pattern

end output setting time.

When set to 0, the output remains ON. The output is turned off by pressing the

STOP Key for 1 second or longer.

Pattern end output time setting range: 0 to 9999 sec. (Default: 0 sec)

Run (program control run) output:

The program control run output is turned on during program control run.

Supply voltage : 100 to 240V AC 50/60Hz, 24V AC/DC 50/60Hz

For the supply voltage, 100 to 240V AC is standard.

For 24V AC/DC, “1” is entered after the model PCD-33A-x/M.

Allowable voltage fluctuation:

100 to 240V AC: 85 to 264V AC

24V AC/DC : 20 to 28V AC/DC

Ambient temperature : 0 to 50 (32 to 122 )

Ambient humidity : 35 to 85%RH (non-condensing)

Power consumption: Approx. 8VA