Instruction manual

26
Press the Key.
Step 1 SV is registered, and
Step 1 time setting mode appears.
Step 1 time
Set the step time to (1:00) using or key.
• Setting range: to 00:00 to 99:59
, (Hour:Minute or Minute:Second)
• Default value: 00:00 (Hour:Minute)
Press the Key.
Step 1 time is registered, and
Step 2 SV setting mode appears.
Step 2 SV
Set the step SV to 200 using or key.
• Setting range: SV low limit to SV high limit
, • Default value: 0
Press the Key.
Step 2 SV is registered, and
Step 2 time setting mode appears.
Step 2 time
Set the step time to (2:00) using or key.
• Setting range: to 00:00 to 99:59
, (Hour:Minute or Minute:Second)
• Default value: 00:00 (Hour:Minute)
Press the Key.
Step 2 time is registered, and
Step 3 SV setting mode appears.
Step 3 SV
Step 3 and after can be set in the same way as
the above.
Press Key to return to Program standby
mode.
[Program standby mode or Program control run mode]
The program pattern setting (example) has been
completed.
PTN PV
STEP SV
PTN PV
STEP SV
PTN PV
STEP SV
PTN PV
STEP SV
PTN PV
STEP SV
PTN PV
STEP SV
PTN PV
STEP SV
PTN PV
STEP SV
PTN PV
Actual temp.
STEP SV