Instruction manual

25
PTN PV
Actual temp.
STEP SV
PTN PV
Actual temp.
STEP SV
PTN PV
Actual temp.
STEP SV
PTN PV
Actual temp.
STEP SV
(4) Pattern (step SV/Time) setting mode
This mode is available for the currently selected program pattern number.
The following is an example of program pattern setting and its procedures.
This program pattern shows that the
temperature rises to 200 for 1 hour,
and stays at 200 for 2 hours.
In this case, Step 1 SV is 200
and Step 1 time is 1 hour.
(Fig.6.2-1)
[Program standby mode or Program control run mode]
Press the Key.
Step 1 SV setting mode appears.
Step 1 SV
Set the step SV to 200 using or key.
• Setting range: SV low limit to SV high limit
, • Default value: 0
Program pattern 1 is selected.
Program pattern 2 is selected.
Program pattern 3 is selected.
Program pattern 9 is selected.
Step number
1 2
200
0
1:00 2:00
C
C
Program control run
PTN PV
Actual temp.
STEP SV
PTN PV
STEP SV