Specifications

2-4 Performance Test
1. Connect the AC adapter at the rear of the scale, then plug the cord in line
outlet．
2. Press the ON/OFF key. All display, segments and characters will blink for
about 4 seconds as a self test.
3. Verify that the display changes by touching the pan slightly, and that it
returns immediately to the original by releasing it．
** INSTALLATION PRECAUTIONS
The ＣＸＩＩ is a precision instrument and requires careful handling. Try to select a good,
clean environment for installing the scale． The following factors may cause the scale to
return inaccurate measurements．
1. Installation on a soft surface that may flex when objects are put on it or put on the
scale.
2. Environments that have greatly varying temperature and humidity.
3. Environments subject to vibration or an unstable surface for installation of ｔｈｅ scale.
4. Environments subject to air flow from heaters or other air conditioning units.
5. Environments subject to corrosive gases or large amounts of dust.
6. Environments subject to direct sunlight.
3