Specifications

B.) Function tables
1. SEL. limit function *1: disable 2: enable
11.Co. enable when *1: anytime 2: in stable state
12.Li. enable where
0: except zero point or below(minus value).
*1: any area.
13.Pn. limit setting point(s) 1: one *2: two
14.bu. buzzer enable where *0: disable in any area
1: LO 2: OK 3: HI
4: LO+OK 5:OK+HI 6:LO+HI
2.S.S. SCS mode selection *1: normal SCS mode
2: high grade SCS mode (precise sampling)
3.b.G. bar graph indication 0: disable
*1: count gap (fraction)
2: reminding for capacity
4.A.0 Auto Zero 0: not effective
*1: automatically adjusts to zero point
5.A.P. Auto power off
(effective with battery option)
0: not effective
*1: automatically turns off of power
6.S.d. stable judgement 1: rough …(* 2)…4: precise
7.d.i. weighing display resolution select
*1: normal mode 2: high resolution mode
8.IF. Interface 0: output is not effective
1: constant serial output (6-digit format)
*2: constant serial output (7-digit format)
3: RK type output format
A.un. unit selection *0: g 1: oz 2: lb
* mark shows the status set at the shipping time.
#other functions are not mentioned here because they are not related to operations.
17