Specifications

Tare set
1. Enter tare weight with numerical keys. *
2. Press TARE PRESET key.
*If you fail to enter weight and press numerical keys, the current tare
weight in the working area will be stored.
[To clear data in MEMORY BANK]
1. Call up an ID to clear data from memory using memory look-up.
2. Press and hold down the C/AC key until the UNIT W. displays goes blank．
The ID memory data (both UNIT W. and TARE) are cleared.
Memory store with currently set weight
Unit weight and/or tare weight are set in the working area.
1. Call up an ID to save data using memory look-up.
2. Press UNT.Ｗ. SET key.
Unit weight is saved in the ID.
3. Press TARE PRESET key.
Tare weight is saved in the ID.
4. Return to the working area, press RE key.
13