Specifications

3.) SCS (Automatic re-sampling system)
1. Press SCS key.
Beep then flicker : on 5 * (on QUANTITY display)
(*Initial quantity can be changed by ten-key)
Appear : ADD (on WEIGHT display)
2. Load exactly five(5) samples.
Flicker to the RED LED in the SCS key and PuSh on WEIGHT display
3. Press SCS key.
4. Add an optional quantity but within number of acceptable addition
quantity (display on the UNIT W. position).
Adding samples are no needs count.( because acceptable number decrease at
adding.) If too many samples added, sampling cannot be proceeded. Scale tells
you by the sign Sub. Meaning subtract quantity.
Wait to stable after beep then flicker :ADD (on WEIGHT display)
Also change to the acceptable addition quantity.
5. Continue the previous operation until the scale automatically completes
sampling.
However, even before the conditioning, the reference unit weight may be fixed
on by pressing the SCS key at an optional time when the fixation is required.
(In this case, sampling accuracy is not guaranteed.)
Features
- Operators can just concentrate on counting a few pieces.
- Just following the instruction brings accurate sampling.
- Re-sampling is not necessary in most cases.
- No sampling error. (not depend on operators)
- Scale rejects samples in failure of unit weight set.
10