User Manual

73
Characters,
Factory Default
Setting Item, Function, Setting Range
Communication speed
• Selects a communication speed equal to that of the host computer.
• Selection item:
9600 bps
19200 bps
38400 bps
Available only when Serial communication (C5W, C5 options) is ordered.
Data bit/Parity
• Selects data bit and parity.
• Selection item:
8 bits/No parity
7 bits/No parity
8 bits/Even
7 bits/Even
8 bits/Odd
7 bits/Odd
Available only when Serial communication (C5W, C5 options) is ordered.
Stop bit
• Selects the stop bit.
• Selection item:
1 bit
2 bits
Available only when Serial communication (C5W, C5 options) is ordered.
Response delay time
• Response from the controller can be delayed after receiving command from the
host computer.
• Setting range: 0 to 1000 ms
Available only when Serial communication (C5W, C5 options) is ordered.
SVTC bias
• Control desired value (SV) adds SVTC bias value to the value received by the
SVTC command.
• Setting range: Converted value of 20% of the input span
DC voltage, current inputs: 20% of the scaling span (*1)
Available when Shinko protocol is selected in [Communication protocol].
Available when Serial communication (C5W, C5 options) is ordered.
Remote/Local
• Selects Remote (Remote operation) or Local (keypad operation) setting of the SV.
• Selection item:
Local
Remote
Available only when External setting input (EIT option) is ordered.
(*1) The placement of the decimal point follows the selection.